Chevy HHR Key Fob Program – 7 Easy Steps Must Know

If you are a fan of cars or happen to know a lot about vehicle technology, then the concept of a key fob should be familiar.

Key fobs are part of the remote keyless system, which allows drivers to open and close the door from afar. All it takes is a simple press on the handheld remote, and boom, your vehicle is more than ready.

Since key fobs are relatively new to automotive technologies, not all vehicles are equipped with one.

Therefore, this article on the Chevy HHR key fob program will be helpful if you own a similar model. Be prepared to learn about the ins and outs of this process right away!

How To Do A Chevy HHR Key Fob Program

• Step 1: Take the driver’s seat, shut all the doors, and unlock them manually.
• Step 2: Press the key into the ignition port, but let it stay intact. There is no need to start the car.
• Step 3: You will spot the unlock button on the door next to the driver’s seat. Press and hold the button for a while. At the same time, turn your key in the ignition so that the “On” light flashes. Everything except for the engine will be up and running if executed correctly.
• Step 4: Turn the key quickly in this order: Off – On – Off – On while still holding the unlock button. Once the sequence is done, release your finger.
• Step 5: If you are successful, there will be a clicking sound from the door locks. The locks will engage and disengage immediately.
• Step 6: Use two fingers and long-press the “Lock” and “Unlock” buttons on the key fob. You should keep it that way until the door locks engage and disengage once more time, alerting drivers that the new security engineering method has already been applied.
• Step 7: Put the newly setup key in the ignition and turn it to “On”. The program is done if you want to add one key fob only. But if several key fobs are included, make sure to set them up altogether.

FAQs

1. How to reprogram a key fob Chevy?

If your key fob suddenly stops working, chances are the programming data has been misplaced. Here, you will have to reprogram it.

Reprogramming the key fob to your Chevy HHR is not a big deal since most steps are pretty similar to program remote start Chevy HHR. Therefore, you just have to follow the guidelines previously stated.

2. Why is my Chevy HHR key fob not working?

There are several reasons for a malfunctioning Chevy HHR key fob. Below are some of the most common causes and solutions.

• Low battery: Like most vehicle parts, key fobs draw energy directly from the internal battery, which explains its failure to work when the battery is dead. You do not have to major in systems engineering to solve this. A quick stop by the store for fresh batteries will suffice.
• Faulty programming: Sometimes, the problem lies in the setup. Get into your car, shut the door, then try to reprogram the key fob. Wait until the door locks engage and disengage twice before turning the key to “On”.
• Electrical issues: When the two solutions above are futile, you may have to consider your car’s conditions. For example, if the electrical network is down, the key fob will not be able to connect to the locking system.

Unfortunately, you have to reach out to a professional mechanic if this is the case.

3. Where can I get a Chevy HHR key fob replacement?

If you lose the key fob to your Chevy HHR, simply buy a new one at a certified Chevy dealer, or contact your manufacturers directly.

Regarding the security technology issues, you should program the new key fob as soon as possible.

This way, even if someone happens to have your old key fob and tries to access your car, they will stand no chance of infiltrating.

4. Can you do a Chevy HHR remote programming at home?

Yes. Many people are under the impression that HHR remote programming is too complicated for people with no expertise. But this cannot be further from the truth.

The program process is straightforward with easy-to-follow instructions, which you can watch directly here for more details.

5. How to know when your key fob needs to be reprogrammed?

If the onboard computer does not detect any signal from your key fob, it means the assigned unique code has broken down. For the key to regain its functionality, reprogramming it is a must.

6. How much does a key fob program replacement cost?

The definitive price tag will vary from one seller to another. But generally speaking, most mechanics will demand payment from 60$ to 200$, depending on your model and the conditions of your car.

7. How can I tell the frequency of my key fob?

Each remote car device comes with a personal identifier known as the FCC ID. This code is engraved at the back of the cover and is recorded on www.fccid.io.

All you have to do is to access the website, type in the code, and the frequency will be displayed.

8. What is the working mechanism behind a key fob?

Key fobs rely on radio frequencies to exchange information with the reader device inside the car’s locking system.

When the internal receiver senses the waves, it will command the door to lock or unlock. Sometimes, the key fob can even start the car or turn on other features.

Conclusion

After reading this, you will realize that doing a Chevy HHR key fob program turns out to be way easier than expected.

So make sure to send the article to fellow Chevy-owners and see what they have to say!

We hope this post is helpful for you to deal with the issue for your car.

Thank you for visiting our page, and see you soon in the next blog!