Cleaning headlights with Magic Eraser will work, is that right?
Not having clear visibility is a significant safety risk while driving. And poorly focused or dimmed headlights can drop visibility.
Driving in less-than-ideal conditions is already, it’s more severe and tougher if it’s coupled with foggy headlights.
There’s no dodging the expense of having a professional restore your headlights if they’ve gone murky.
Fortunately, there are some DIY ways to clear out foggy headlights, notably a Magic Eraser. This article will tell you how to apply it.
Cleaning Headlights With Magic Eraser: 5 Simple Steps To Do
Will Magic Eraser clean headlights? Yes, Magic Eraser not only does wonders for your leather seats but also for headlight cleaning.
This is a simple and low-cost project. From the get-go, prepare a Magic Eraser, drying cloth, masking tape, and clean water to clean your headlights.
Step 1
To avoid repainting your entire automobile after you clean headlights with Magic Eraser, tape off an outline first.
Inadvertently removing commercial paint from your car during the cleaning process is possible.
Step 2
Then, to activate the eraser and make it ready to use, dip it into the warm water and squeeze it until it gets damp yet not soaking wet.
Step 3
Adopt the Magic Eraser on car headlights and gently buff them in tiny, circular motions.
Still, do not apply Magic Eraser in these areas to avoid scratching or rubbing off your car’s body pain or protective film.
Step 4
Let tiny, circular motions buff your headlights for roughly 8-10 minutes. If the Magic Eraser dries out after a couple of minutes, simply re-wet and re-squeeze it.
Step 5
After 8-10 minutes, your headlight will shine through again. When this occurs, use a clean towel, paper towel, or clean cloth to pat the area dry.
How To Seal Headlights After Cleaning With Magic Eraser
After using the Magic Eraser to clean headlights, you can keep the headlights clean and clear for much longer by sealing them after cleaning and restoring your headlights.
Here comes 4 quick steps to have things done:
Step 1
To begin, take a dry cloth and apply a moderate headlight sealant. If extra sealing is required, you can always add it later.
Step 2
This is a crucial step. Once cleaning the headlights, gently use the cloth to polish them.
To get the best results, employ the sealant using small motions like what you do with Magic Eraser. Unlike the cleaning step, the sealant will cause a cloudy layer on your headlights when first applied.
Nevertheless, rest assured, this is only a momentary setback.
Step 3
Headlight clarity will improve in no time. When your headlights glow after applying the sealant, you make it.
Step 4
Just repeat the steps to fix the other headlight until you’re satisfied with your job. Good luck!
Why Should You Clean, Restore, And Protect Your Headlights?
Not only do we care about the aesthetic value of the light housings but also the functionality of the lights within.
Headlight lenses that have become yellowed, foggy, or hazy disperse light rather than focusing directly in front of the vehicle as intended. Simply put, clearer lighting improves our vision.
Furthermore, an unfocused headlight lens is more dangerous to oncoming cars.
Always set your eyes on small but vital parts, like glass headlights or rear view mirrors, in good working order to ensure your safety and others on the road.
The hazards involved in degraded headlights and the glare they emit have been documented in a paper by the National Highway Traffic Safety Administration.
Keeping our headlights clean and clear is crucial for many reasons; thus, let’s look at some tools and techniques utilized for this objective.
Where To Buy Clean Magic Eraser
DIY headlight restoration with Magic Eraser is a viable option, but it’s important to note that these are not headlight cleaners.
You can unlikely pick up a Magic Eraser at your local auto shops. Shop around instead in other stores like
- Family Dollar
- Walmart
- Home Depot
- Lowe’s
- Walgreens
- CVS Pharmacy
- Target
Due to their widespread availability, Magic Eraser can be found in any store specializing in housekeeping supplies.
Headlights can be cleaned with any Magic Erasers, although Mr. Clean is the most well-known brand. Other candidates include Uline, Scrubit, Star Brite, Quickie, and Foam World.
Fixing your car’s cloudy headlights won’t take as much time as other fixes. Use Magic Eraser and sealant to keep your headlights bright and dazzling for an extended period.
FAQs
Cleaning Headlights With Magic Eraser And Toothpaste: Does It Work?
Hardly anyone combines these two products. Instead, they often blend baking soda and toothpaste. Of note, this method is best for lights showing early UV damage.
After removing the filth, dirt, stubborn stain, and debris, apply toothpaste to a clean headlight. Scrub the lens in a circular motion with your brush. When satisfied, rinse and dry the lens.
How About Bug Spray Headlight Cleaner?
While this item is unsafe for humans, it’s fantastic for cleaning foggy or dirty headlights.
If you already have bug spray, you won’t need to go to the stores or mechanic shops.
Spray bug repellent on a towel and wipe the headlight clean in no time. In the end, you can get surprised with the results.
Is It Safe To Use Magic Eraser On Headlights?
Yes. No one has ever reported Magic Eraser ruining your automobile headlight.
Magic Eraser is a clean product safe for home, car use, and your cloudy headlights. Still, avoid Magic Eraser on easily-scratched car parts.
Can I Restore Worn Headlights With Wet Sanding?
Yes. Of course. Wet sanding will polish and restore the worn headlights. Anyway, it is pretty complicated. There’s no shortcut here.
To restore your headlights, you’ll need the know-how and elbow grease.
If you can’t wet sand or spray a clear coat, you have two options:
- Replace headlights. Yes, it’s not cheap, but you can find them for a fair price these days, and it’s better than ruining your paintwork.
- Restore your headlights at a body shop. The experts there will have things done quickly, so you get no worries.
How To Clean Headlights With Baking Soda And Vinegar?
Some people favor vinegar and baking soda to clean headlights over other methods.
Apply your cleaning mix to your lenses and scrub with a microfiber cloth after dipping it in vinegar and baking soda. Rinse and repeat till the job is done.
Apply paste wax or paint sealer after achieving optimal results when the surface dries. Finally, buff the headlights.
The Bottom Line
Among all cleaning products, Magic Eraser may blow your mind away, yet, unfortunately, fewer people have a chance to get this effective tool.
This handy paste is perfect for wiping everything from a young artist’s marker on the wall to food stains in the sink.
And what else can this miraculous sponge do? Cleaning headlights with Magic Eraser easily comes to our minds.
Still, if the Magic Eraser headlight cleaner gets in vain, perhaps you can refer to other solutions. Share and help others learn about this post as well.