The Chevrolet Spark is one of the top-selling Korean models with a leather-wrapped steering wheel in many regions and widely spread across the US, according to many satisfied customers and experts.
Such Korean models incorporate multiple safety features but are not flawless. One of the prevalent complaints is the code 95 Chevy Spark.
Let me assist you in finding the answers you need to figure out what’s going on and how to address the drive unit’s problems. Get the ball rolling!
What Does The Code 95 Chevy Spark Mean?
On a Chevrolet Spark, error number 95 points to airbag ongoing reliability issues (airbag issues).
They may not run correctly and need servicing. The models from 2013 and 2019 had this issue frequently.
This is quite similar to the airbag light on Nissan. To treat the ongoing reliability issue on my car, my only choice is to reach the nearest servicing facility.
The Chevrolet Spark Facelift model has several safety features; each may face hurdles without proper diagnosis and upkeep. One of these Chevy Spark codes can involve the airbag.
A car’s airbags are pivotal. Inflating at the scene of an accident aids in impeding the potential physical injury to the drivers and the passengers.
Qualified airbags are also a core part required in the safer cars crash test or crash test safety rating.
Yet, once this component gets into trouble and the Chevrolet Spark detects it, the autos can alert the drivers by displaying a message called error code 95.
What Are The Triggers For The Code 95 Chevy Spark?
Battery Depleting
The airbag has its own battery operating off of the car’s battery.
If you drain the car’s battery utterly, the airbag battery could die and start flashing the Chevy Spark code 95 accordingly.
In this case, I often have to recharge my car battery properly. Yet once the all-out effort is in vain, a replacement is a must.
Bad Seat Sensor
If you drive an electric Chevy Spark manufactured between 2013 and 2019, there is a high chance that one of your sensors is failing.
This could prohibit the airbags from deploying in the event of a collision.
Error 95 is displayed if the car’s sensors issue warnings.
Defective Airbag Module
The likelihood of the airbag module malfunctioning is low, notably in a fourth-generation model.
If this is the case, the check engine light might be on, and the error code 95 would pop up simultaneously.
Poor Wiring Harness
Under the seats are the airbag sensors with wiring harnesses. The primary cause of code 95 is the wiring harness disruption.
The seat moves back and forth, and any objects wedged under the seats or moisture can impair the harness.
In this case, I examine the wiring harness meticulously using a sound flashlight or the phone light. Afterward, I inspect the wiring on the passenger seat and driver’s sides sparingly.
See where the harness attaches to the modules underneath the seats. The harness can tear just where it plugs into the module if I move my seat back and forth frequently.
Sometimes, the cut is clean, so you may not notice it.
Occasionally it merely loosens just a bit under a fully plugged-in look. Ensure the module is entirely snuggled into your module.
Faulty Clockspring
The clock spring moves the steering wheel and airbag at once. When this spring breaks down, the airbags can’t inflate and deflate as typical.
Turning the steering wheel when the spring does not move is tough. Accordingly, the dashboard may display the error code 95.
How Do I Fix Error 95?
Seek The Onboard Diagnostic Port
There is a diagnostic port built into Chevy’s dashboard. Based on the manufacturer’s guide, I connect my scanners to the appropriate port.
Turn Your Ignition On
Turn the ignition on after connecting, but don’t start the engine. In other words, I keep my feet off the pedals while you start your express vehicle or concept vehicle.
Once I turn on the car’s ignition, the scanner will automatically start and shut off.
Manually Erase Fault Memory On Your Scanner
When the scanner reboots, select the diagnostic mode. Choose the automobile model and go with the airbag system. See whether there are any error messages displayed.
To cure the problem for good, go through the steps mentioned in the website or user manual and make all the needed changes.
When done with the aforementioned matters, return to the airbag unit and select “Clean/erase Fault codes” from the menu. Amazingly, the fault memory vanished and reset rapidly when I did so.
If the DIY method is not your cup of tea, go for customer service for maintenance. This way also helps halt the ongoing reliability issues.
FAQs
What Do The Code 82 Chevy Spark 2014 And Code 82 Chevy Spark 2015 Mean?
The 2014 and 2015 Chevy Spark code 82 means an oil change is required for your third-generation Spark (even the second-generation Spark and fourth-generation Spark).
This is a notice, not an alert, but it does deserve prompt attention. In other words, it may be a sign of problems relating to fuel economy or fuel mileage.
The Code 82 problem can be rectified by changing the oil and then resetting the system.
What Is The Chevy Spark Code 65?
The code 65 Chevy Spark implies an attempt to break in that the alarm system tries to prevent. Perhaps, an unauthorized individual (or a thief) tries to access a door or start the car.
Also, your sensor or the body control module may break down if this code pops up with no signs of damage. In most cases, you can safely erase and neglect this warning.
Still, once the issue persists, have your Chevy inspected to ensure that the alarm’s computer is Ok.
Endnotes!
The Code 95 Chevy Spark is part and parcel of keeping your drive unit running smoothly and efficiently.
I’ve rounded up its meanings, some common ongoing reliability issues, and the corresponding solution to keep it in tip-top shape.
Now that you feel confident, it’s time to fix the code and ensure the health and longevity of your Chevy Spark.
Seeking professional support is a top priority once you have difficulties addressing the hardship on your own.