Honda accord check charge system is one of the situations that makes car users feel extremely confused and uncomfortable.
Many customer complaints have been sent to Honda asking to explain the cause of the above problem.
To help you understand what a check charge system is? Causes and ways to effectively fix the condition of the Honda charge system and battery strength.
Let’s find out together this exciting information through this article.
What Is The “Check Charge System”?
The check charging system honda accord appears in most vehicles, and Honda cars are no exception.
If the Check charging system light comes on but shows no sign of going off, your vehicle has some potential problem.
Bad battery lights can be triggered to light up for various reasons, but you shouldn’t ignore them and find out what’s wrong with your car.
Usually, the Check charge system signals your car that glows is a signal that the battery, generator, or accumulator is having problems. They are usually a sign that the starting or charging system is failing.
Cause Of Honda Accord Check Charge System
Low Battery
First, the problem is that the Honda car’s battery can be damaged. This might occur if the battery is outdated or if the service battery is not serviced regularly.
The lack of maintenance and frequent use causes a shortage of electrical fluid. Therefore, you should periodically care for, check, and clean the device.
Once the car battery fails, it won’t charge enough to ensure your automobile is on the road, and use other electrical devices like lights, push buttons, radios, and fusible links.
And replace the car battery immediately if it has been used for a long time and is damaged.
If you don’t know how to change the battery, take your automobile to a mechanic to get it examined. You may also try replacing the battery to check if the error message still appears.
Wire Connection Is Loose
The loose connection is the second possible reason for the check charge system honda accord. This might happen if the battery terminals are open or there are no wires connecting properly.
Battery problems generally arise around the alternator or at the battery connectors.
Before producing this problem, loose wiring or battery loss might create other issues, such as the battery not charging at its optimum pace.
It would be best to equip a portable battery charger in an emergency.
Alternator Is Broken
A third possibility is that the alternator belt is not properly charging.
The check charge system honda accord 2014 may occur as the alternator is not operating properly or indicates a fault with the power system and the alternator is defective.
The alternator of Hendrick Honda must meet the needs of the vehicle’s power system; it only runs out of battery power when driving in traffic if there is a problem.
Fuse Is Exploding
An electrical short generally causes a blown fuse. Fuse exploding might occur if your automobile battery or the alternator fails. If your car has blown a fuse box, you must replace it immediately.
If you suppose a blown fuse, consult the owner’s handbook to determine which fuse is appropriate for the battery charger.
When you’ve found the proper fuse, unscrew it all and inspect it for indications of burn.
Fan Belt Has A Problem
A faulty fan belt might set off your Honda check charge system warning light. This fan belt is the part that controls the alternator, helping the car to charge the battery after long approximate mileage.
If the belt fails, the alternator cannot function, resulting in a dead battery.
How To Fix The Status Of Honda Accord Check Charge System
You may do a few things if the check charge system 2014 Honda accord warning battery light turns on.
- The first step is to ensure that the battery is adequately charged. If your battery is running low, actually charge it using a jumper cord or a transportable charger.
- With a fully dead battery, it must be replaced once charged.
- Indeed, if the belt is broken or loose, it must be changed.
- In addition, inspect the voltage regulator and alternator for any indications of harm. In the event that this is the case, it should be changed right away.
- Examine the electrical system’s fuses and switches. When any of these elements get damaged or stop performing properly, they must be removed.
4 Steps To Prevent Your Honda Car From “Checking Charge System”
Visual Inspection
Turn off the engine, open the bonnet, and visually inspect the various details of the charging system.
Check the alternator drive belt for wear or loss, the alternator’s connector, fixing bolts for opening, the electronic control units, and the battery terminals for oxidation or rust.
Pay attention when inspecting the belt; you need to see if the belt tension is appropriate or if the belt booster is damaged.
And the belt shows signs of tearing, cracking, or peeling of the rubber. If so, it should be replaced immediately.
Check The Power Cord
Credential check the alternator’s rear power cords and jacks for breaks, rust, or corrosion. The power cord is the primary connection tool, so it should be replaced immediately if there is any problem.
Check The Charging System Status
You must watch the battery’s current voltage to check the system charge light. Usually, if the charging system works well, the battery voltage will be 12.2 – 12.6V, which is in excellent condition.
If the voltage is much lower than this range, you will need to charge the battery before further testing.
- No load: You need someone to start the car and let the engine run at 1000 rpm. Using a battery voltage meter, the voltage value at this time should be 0.5 – 2V higher than the previous voltage. The battery may be overcharged if the voltage is 2V more elevated than the base voltage. The cause may be due to a faulty alternator.
- Under high load: You need someone to start the car and let the engine spin at 2000 rpm. Turn on loads such as air conditioners, fans, headlights, and radios, and measure the voltage on the battery. At this time, the estimated voltage value on the meter must be at least 0.5V higher than the base voltage. If the voltage is not higher, the charging system is not working correctly, possibly due to a damaged moderator.
Check Voltage Drop
Start the car and have someone press and hold the gas pedal to get the engine going at 1500 rpm. Then turn on the electrical components on the vehicle such as lights, air conditioners, radios…
Turn the meter onto the DCV scale, then put the red and black probes on the meter into the battery’s positive pole and the B+ pin on the generator, respectively.
The voltage value should be about 0.2V or lower; if it is higher, it will decrease the charging voltage for the battery.
For loose, rusted, or corroded connections, you must check the connections between the generator and the battery clamps.
Next, repeat the process, but in return, the red probe is placed on the generator housing, and the black probe is placed on the battery’s negative terminal. The voltage drop should be at 0.05V or less.
When it’s higher, something’s broken. Then you should check the ground connection of the battery is sure, and you need to tighten it again if it is too loose.
Conclusion
The light on the 2014 honda accord check charge system is a problem that cannot be ignored.
If the check system charge light shows no sign of going off, you should open the battery area and check the engine light carefully.
The issues we mentioned about the battery, loose wire, fuse, and alternator must be thoroughly checked.
If you have emergency questions or difficulty repairing this issue, contact the nearest Honda Dealer Tech to find experts’ qualifications.