Bad Starter Relay Symptoms And How To Bypass Starter Relay

Believe it or not, there are still many car drivers who don’t know how to bypass starter relay. The starter relay is essential to your vehicle’s power system but is sometimes disregarded. 

The powertrain of your vehicle won’t trigger if the starter relay malfunctions. If all you get is a clicking noise when you attempt to start your automobile, it might be a problem with the ignition system or starter relay.

There are certain actions you must take to be able to get in the automobile and switch on the motor.

This article will cover all the necessary information about starter relays, including common car starter problems and how to solve them.

Symptoms Of A Bad Starter Relay

How To Bypass Starter Relay

The Vehicle Won’t Start

There might be various issues if you turn the engine on and nothing happens. Among the most evident indicators of an automobile malfunction is a car that won’t start.

The defective starter relay is frequently the root of the issue, even though numerous other potential problems could stop the automobile from running.

You should first gain a better understanding of the starter relay’s operation before we can comprehend it.

Your power supply is rattled when you twist the ignition switch, unleashing a surge of electric power. This energy activates the starting motor, which starts your engine.

The electronic impulse from your cell cannot reach your starter motor if the starter relay is broken.

As a result, trying to start your engine multiple times will not work. You might notice a click when turning the ignition key if the connection is not damaged.

The Starter Relay Is Still Open After The Engine Has Started

The starter fuse and the generator should turn off when we switch the electronic ignition key.

Since the starter relay’s primary connections are likely already fused and located in the closed state, the engine won’t stop starting if it doesn’t operate in this manner.

It typically happens when the relay contacts something or is exposed to a lot of power. This electrical issue must be identified and fixed because it can harm the startup system.

Clicking Sounds

If the starter motor relay is damaged, just a portion of the current can be transmitted.

The starter relay clicks, but the motor does not start, indicating that the car engine is not getting sufficient electricity from the relay.

This could potentially show a low or dead battery terminal. The relay doesn’t function unless it sends the starter adequate power.

Insufficient horsepower may severely damage the starting system or result in the car not starting at all, along with an unpleasant clicking noise or chugging sound.

Occasional Starting Issues

You can find that your automobile has intermittent running issues if your starter relay is malfunctioning. This implies that it can normally begin someday but also have trouble starting the following day.

A faulty starter relay represents one of the most frequent causes of intermittent starting issues in cars. The starter relay is in charge of powering the engine; if it malfunctions, the engine won’t start.

The starting relay may occasionally develop corrosion or damage, leading to intermittent failure.

Common Causes Of A Malfunctioning Starter Relay

Drained/Weak Battery

Before performing anything else, confirm that your battery is supplying sufficient power. Experiencing difficulty starting your automobile is one of the many electrical problems a dead battery can bring.

Check whether the starter relay receives battery current or measure the battery voltage from the cell using a voltmeter. A bad battery will need to be recharged or replaced.

Faulty Wiring

Replace the starter relay’s connections if it seems to be broken. You may use a multimeter to verify if there aren’t any outward symptoms.

A defective piece of starter wire needs to be changed when there is no connection between the power lines and the ground.

Defective Battery Connections

If the battery wires on the starter relay have become corroded, they might have to be replaced if the contacts are slack.

Impure Connections

The starter relay connections might still need cleansing if they are simply filthy. Nevertheless, the element needs a replacement if the impurity has indeed damaged its wiring.

Malfunctioning Solenoid

The starter equipment is mechanically engaged and disengaged by the solenoid. When it is broken, it’s likely not able to activate the starter gear effectively, which could lead to the circuit breaking down.

The solenoid is probably broken and must be repaired if there is no contact between the engine ground wires and the ground.

Expired Coil

The coil supplies energy for the solenoid. It must be changed when it has burnt out. If you think the jumper wire might be burned out, the multimeter is once more your friend in this situation.

Check for friction; in case you find none, it has already been clogged and must be changed.

Stagnant Brushes

Energy is transferred from the coils to the actuator by the brushes. Once they have been damaged, you should replace another one.

A Component Of The Starter Relay Is Defective

The starting relay is in charge of providing the motor with power. The car might not start if the electric components are not operating correctly.

Therefore, it may be necessary to replace the relay if the internal parts are harmed.

How To Bypass Starter Relay

Learning how to bypass the starter relay is useful in a variety of circumstances. The starter relay could be a problem if your automobile does not start.

To restart your automobile, you are able to bypass a starter circuit.

Step 1: Locate The Starter Relay

locate relay starter

Underneath your car, look for the engine and starter relay. The motor is often mounted to the bell metal box or fuse box relay housing on the vehicle’s driver’s side door.

The starter is typically cylindrical in form and 8 inches in length. The solenoid is affixed to it with bolts. On the solenoid’s rear, two terminals are fastened with bolts.

Step 2: Find The Metal Contacts

Find The Metal Contacts

Find the metal connections that link the solenoid to the ignition system. The metal connectors are connected through the jumper cables on the backside of the starter relay.

Step 3: Create A Connection

Create A Connection

Crossing both wires with the shaft of an isolated screw can create a link between them. Another person should start the ignition.

Change the relay if the motor starts up and emits a steady hum, indicating that the starter is functioning properly.

The bristles in the ignition system are burnt out when the engine won’t turn on. That’s when you should change or replace the start relay.


Symptoms Of A Bad Starter Relay

It is crucial to ensure the start relay functions normally in the automobile that must trigger the relay.

This is a typical element of routine car repairs. The first step is learning how to bypass starter relay and spot a malfunctioning relay immediately.

Leave a Comment