How To Put Air In Tire With Broken Valve Stem To Save Time

Have you got a broken tire valve stem? Are you trying to figure out how to put air in tire with broken valve stem?

If you choose to take any haphazard method, this task may prove to be equally tiresome and challenging.

You might still drive with a valve stem broke on tire, but you need to take immediate action to fix the situation before it worsens or until you can reach a technician.

Even with a broken valve stem, you may quickly need an air valve on tire by following a correct step-by-step technique.

Everything you need to know is included in this post. Make sure you pay close attention to the following article.

What Causes A Tire Valve Stem To Break?

bad tire valve stem

Well, a tire valve stem can break under rather extreme circumstances. The major reason a valve leaks is wear and tear.

A valve is a pin that protrudes from the tire’s sidewall and allows for the tire’s inflation and deflation. Its operation entails a spring-mounted valve that seals firmly in conjunction with the air density within that tire.

The stem valve’s possibility for cracking and brittleness throughout time may raise the chance of air leaking thru it.

As your tire gets outdated, similarly to any other component of your car, it may start to malfunction and break, which can sometimes lead to tire issues.

The damaged tire loses its ability to hold air once the valve stem not taking air. The air may seep out differently depending on the severity of the damage.

A valve stem’s failure can also result from various factors, including age. When not regularly maintained, your tires might easily get damaged by heat, weather, or other debris on the road.

How To Put Air In Tire With Broken Valve Stem?

How To Put Air In Tire With Broken Valve Stem

Even if the leakage on your valve stem is minor, it will require constant tire inflation and air density inspections.

Don’t let a damaged valve stem ruin your happy days. You can quickly resolve the problem and put air in your car’s tire.

Make sure you adhere to the instructions below to know how to change the valve stem on a tire and inflate the tire if your valve stem breaks on the tire.

Step 1: Lift Up Your Car And Remove The Tire

Have a good lift first so you can raise the car, particularly on the side that has the tire with the damaged valve.

After lifting the car, use a stand to support it. The tire can be removed by loosening the lug nuts on it with a lug tool.

Step 2: Release The Tire’s Air Pressure

Go on and deflate the tire after detaching it before continuing. You can deflate the tire by extracting the valve core with a valve core tool.

Step 3: Remove The Bead From The Rim Of The Car

Once the tire is deflated, use a pry bar to pull open the area surrounding the valve stem between both the bead and the tire’s lip.

Once that is done, use some pressure to remove the bead apart from the car’s rim. To make things easier, you might need to pound the pry bar.

Step 4: Dispose Of The Broken Valve Stem

Next, remove the inside rubber tip of the broken valve stem to loosen it. After that, using pliers, grip the valve stem and yank it all out. Remember to keep any small object from slipping into the tire’s hole.

Step 5: Change Tire Valve Stem

Get your car tire valve stem replacement and place it within the opening after disposing of the broken one.

After that, use the pliers and push it all through so that it may fit correctly. Press onto the tire after straightening it up.

By doing so, the bead will just be able to move past the inside rubber rim of the valve stem.

Step 6: Pump Air Into Your Tire

After you’ve changed the replacement valve stem, pump your tire. Make careful you raise the pressure to the retailer’s recommended level.

If you already have an air dispenser, use it; otherwise, go to the closest gas station to find one. A loud rumbling and buzzing sound should be audible when the motor is running.

To fill the tire with air, place the pump’s tip against the air valve’s opening and hold it steady when the tire is filling with air.

Step 7: Reattach Your Tire

Use the tool to twist the lug nuts while you secure the tire into its original position. As you twist every nut, remember to check that it is firm enough. You’re all set to leave once you’ve finished this step.

Can You Replace A Valve Stem On A Tire Without Removing The Tire?

Yes, you can. But on the side with the tire valve stem, you must deflate your tire and detach the tire bead from the frame. Although a little challenging, it is manageable.

It could be time to wrap up replacing the valve stem if you have searched for nails but have not found any.

How To Install Valve Stems On Tires?

How To Install Valve Stems On Tires

The technician don’t need to remove your tire to replace your valve stem. Let’s look at detailed installation and replacement instructions for tire valve stems.

Tools Needed To Change Tire Valve Stem

Remember that you should have the appropriate tools when you begin repairing something.

A new valve core and valve stem tool must be purchased in addition to your replacement valve stem. The shape of a valve stem tool is like a plus sign.

Install Valve Stems On Tires Instructions

  1. Check for leakage in the valve stem: You need to guarantee that your valve stem is genuinely leaking before replacing it. You can check for leaks by rubbing the opened valve stem with a mix of water and dishwashing detergent. If the liquid bubbles, your tire’s valve stem is leaking.
  2. Release all of the air from your tire and remove the valve from the tire with the help of the valve stem tool.
  3. Remove the valve stem core and discard it.
  4. Clean the new valve stem using the valve core tool. Make sure that the valve stem’s opening is completely free of debris.
  5. Replace the new valve stem with the same side of your valve stem tool.
  6. Check for leaks when you install your new valve.
  7. Pump air to your tire and reinstall the valve cap once your new valve is securely fastened.


valve stem broke on tire

How Much Does It Cost To Replace A Valve Stem On A Tire?

At the majority of technicians and tire shops, the price range for a fundamental, uncomplicated valve replacement without any detectors or electronic parts should be between $5 and $30 per tire.

Based on the company’s policies, some technicians may have a standard fee, but the majority are delighted to provide an estimate over the phone.

Can A Tire Hold Air Without A Valve Stem Cap?

While a valve cap has many useful purposes, one of them is not to maintain the air inside your tire. A “cap” prevents debris like debris, dust, water, and tiny pebbles from entering the valve stem.

What Occurs If A Valve Stem Is Lost?

Tires can leak air fast due to valve stem fractures, and when this happens at freeway speeds, it can lead to tire breakdown and an out-of-control accident.


A damaged valve stem can make your tires lose air, leaving you with a flat tire. Expert replacement can price more than $30, but in certain cases, you might be able to change a damaged stem on your own.

As you can tell, replacing a valve stem on your own entails several straightforward processes.

Therefore, following our instructions on how to put air in tire with broken valve stem above will make the otherwise tedious operation of inflating a tire with a damaged valve stem enjoyable.

You’ll spend less money and time doing something like this.

Leave a Comment