Though transponder keys are convenient for your vehicles, you can still have problems with your chip keys – They can go bad, get lost, or be dead sometimes.
What should you do in this case when this part goes dead, then? How to start my car without chip key?
Keep reading on this blog, as we would like to share with you all the tips and methods on how to start car without key chip!
What Is A Chip Key?
Chip key, transponder, or FOB, is a traditional metal key with an secure chip embedded inside the silicone sleeve.
The demand for a more secure means to enter the car began to grow rapidly in the 1990s, leading to transponder keys’ development.
They look like regular keys but contain a signal-emitting chip that communicates with the ignition coil’s receiver.
Every time you need to enter or switch on the automobile, a similar code is broadcast between these two elements, the transmitter in the key and the receiver in the car.
If the vehicle’s code matches the keys, the ECU will start the vehicle; otherwise, the vehicle will not start.
How To Start My Car Without Chip Key?
You can not bypass transponder keys easily. That means there is no way you can start a car without one.
In this case, only the dealership can help by giving you a replacement of your chip key after reading your car’s radio-frequency identification.
Suppose you got a transponder chip, there is a solution you may attempt.
- First, remove your silicone cover using a pliers or screwdriver. Because of the tightened seal, something sharp might work better to create leverage.
- Now, remove the chip from the device. It resembles a transparent tube or black square.
- Attach the chip to a tape piece and stick it to the lock.
- Try starting your key with a dismantled/ new key without the chip.
- Reposition the tape if the vehicle does not start and take another try.
- Once you have discovered a working location for your chip, fix it with glue.
- Any replica of a key will operate thanks to the transponder chip since the transponder chip is constantly near the ignition lock.
Although the disadvantage is that you are damaging a protection layer, it is not a big matter as your car anti-theft systems still operate as deterrents.
Interestingly, since the proximity of two transponder chips causes interference, it may even serve as a superior security system in some cases.
How Can I Start My Car Without A Fob?
The transponder chip’s technology developed into contemporary keyless fobs that need to be near the engine’s ignition.
Because it’s common for these battery-powered processors to fail, designers ensure that you have a simple way to open the car and start the engine.
Start Car Directly
Starting your automobile gets easy once you are inside. Most automakers anticipate the requirement for keyless ignition if the fob fails, so a system has been devised to work even if the remote is not working.
Most automobiles include a way to start your car manually, and others have alternatives integrated into the key fob that function rather well without a key.
Even if your automobile has a keyless entry, there is a key slot somewhere near the steering column that you may not have discovered.
This is how Mazda cars are outfitted. Flip the “switch,” a plastic cap covering your keyhole.
Use Mobile Apps
Smartphone apps may also open and operate the car instead of the key fob. You’ll need to download one of the below applications, depending on the manufacturer:
- BMW: Connected Drive
- Audi: MMI
- Chevrolet, Cadillac, GMC, Buick: OnStar RemoteLink
- Jeep, Chrysler, Alfa Romeo, Dodge, Fiat: Uconnect
- Lincoln & Ford: Sync Connect
- Hyundai: BlueLink
- Infinity: InTouch
- Nissan: Nissan Connect
- Lexus: Lexus Enform
- Subaru: StarLink
How To Start A Car Without A Key?
If these above ways can not help, you can try the following methods to start your car. These options will keep you going until you obtain your spare key or have locksmithing build you a new set.
Screwdriver & Drill
The quickest and most popular method for turning your car’s ignition is to use a screwdriver & drill. Still, you must be very careful in order to avoid harm to the ignition.
If you need to deactivate the lock mechanism, this method is the most suitable. On the other hand, the car key mechanism will be irreparably damaged.
Using this method, you will need to drill your keyhole starting at the inner flaps position. It might be around 2/3 inches long. Then, you must pull the drill and lock bits out.
You may now attempt to start the car by putting in the screwdriver head.
Suppose you do not have a screwdriver, any metal piece can do the job. It is expected that your car will start successfully due to this.
Hotwiring
Hotwiring an automobile is another technique to start without a key. For automobiles built in the 1990s, the Hotwiring method is perfect.
You must remove the steering helm column’s plastic cover to use this procedure. Both sides are screwed together, so you must make sure to get rid of them first.
This will provide you access to the system of ignition. Before moving on to the following stage, make sure you wear your insulated or protective gloves.
Now, pay attention to distinguishing the battery cables and starter. The red lines are usually the battery wires. The brown and yellow cables, on the other hand, are the ignition.
Make a small insulating cut your battery’s cables. Now, cut the cables running from your cylinder as well. Finally, twist the ends of the battery cables and the wires together.
Red Coil Cable
This method is for land vehicles enthusiasts with sufficient technical expertise. You could, for example, start your automobile without the key if you had the abilities of a skilled technician.
To start, you need to look under the car’s hood for the cable. Grab the jump starter cord first.
Then, connect the positive terminal of the battery together with the red coil cable. Specifically, this cable is also called the coil’s positive side.
The dashboard should have received some electricity at this point. To discover the starting solenoid, continue this procedure by unlocking your steering wheel.
Keep in mind that the positive connection of the battery should be linked to this solenoid.
Disconnect the switch wire out of the solenoid one. Subsequently, use a screwdriver to shortchange the solenoid’s positive post around where the wire harness is mounted.
This method lets you supply 12 volts to your car’s battery automatically. Once the solenoid is activated, it allows the starter to turn on the automobile.
How To Bypass Transponder Without Key?
You might have found numerous answers while searching for how to disable transponder key system like this:
- Set the ignition to the On position by inserting the key into the ignition.
- After roughly 10 minutes of being in the On position, turn it back to Off.
- Repeat the procedure twice more.
- Remove the key from the lock.
This is nothing more than an excellent way to waste half an hour and a large amount of your battery. Contrary to popular belief, RFID chips cannot be programmed that easily.
You won’t be able to replicate the chip code into another transponder key without the help of an authorized dealer, or a locksmith. The vehicle industry is never that easy to attack.
If the locksmith does not work with an original, it will have to search a database for your car’s radio frequency ID or use specific instruments to extract it from the transport.
Moreover, because the automobile is not sending; it is receiving, there is no way to pick up the frequency and figure out what it wants to read.
FAQs
Will a non-transponder key start my car?
A non-transponder key may allow a thief to get access into your vehicle, but they will not be able to do much else!
Transponders are usually connected to an immobilizer area and build up codes that, if they do not match, the engine won’t start.
Auto thieves can easily utilize car picking equipment to start and turn your vehicle’s ignition. Non-transponder car key is typically found in older vehicles without an immobilizer system.
How To Start A Honda Accord Without A Key?
Because your Accord has been equipped with an immobilizer, you will not be able to simply ‘hot wire’ it.
So, the only way is to make an appointment with the Honda dealership and have the vehicle hauled there.
They can make a new key and reprogram it to work with the car. To get the keys, you will need to show evidence of ownership.
Conclusion
Hopefully, this blog on How to start my car without chip key is helpful for you.
The automotive industry has grown so well nowadays, and automotive technologies are developing more and more complex.
Therefore, it is not easy to bypass vehicle technology without authorized help. We believe our detailed instructions above can be useful for you in case of any emergency!