Your service Stabilitrak Chevy Cruze shaking makes you worried. You are afraid that there will be something wrong with the car when driving.
Stabilitrak is a one-of-a-kind safety device found in all GM cars. It is GM’s form of electronic stability control (ESC) and aids in keeping your vehicle on the road securely.
Driving on slick roads is highly hazardous. A driver can rapidly lose control of the vehicle with one wrong action.
Traction control devices were developed to keep a car from drifting and to adjust the vehicle’s position.
Stabilitrak expands on the idea by giving the driver more control over their car. That is why people are afraid when something is wrong with the special service Stabilitrak.
However, worry not; we will know all the reasons below.
What Are The Common Reasons For Chevy Cruze Shaking While Driving?
If your car starts to shake or vibrate as you travel, it could be a frightening experience. It is a sign that something is wrong.
This kind of situation indicates the need for a small repair or a replacement for more severe technical problems. Here are some common reasons for Chevy Cruze shaking service Stabilitrak.
Tire Issues
Tire problems are the most common cause of Service Stabilitrak Chevy Cruze car shaking while traveling. When tires become worn, they begin to act differently.
Also, you will experience shaking when the tires are out of balance. It could be because the pressure of different tires is not even.
The Stabilitrak employs sensors to determine the steering wheel positions and tires. This mechanism will ensure that they correspond to the way in which your car is going.
When it detects that the model vehicle is out of control, it will make automatic changes, including reducing the power. Thus, you may suffer some shaking and vibrations.
The common remedies include tire replacement, adjustment, and rebalancing.
Engine Firing Issues
If any or all spark plugs fail to fire properly, your vehicle will shake. Typically, this issue will also activate the check engine light.
When you start the car, it should quickly show that it is operational.
Suppose there is an issue with the Stabilitrak. In that case, you will most likely see a notification in the Driver Information Center, and the Stabilitrak dashboard indicator will come on and remain on.
When an engine misfire is to blame, the vibration is typically accompanied by a loss of strength or hesitation.
Brake System Issues
When the trembling or shaking of the steering wheel happens only after you press the brakes, it’s time to examine the rotors and brake pads.
The metal begins to deform or bend as blades are exposed to puddles, heat, and tension.
A deformed rotor can appear at any moment, but it also suggests that the bad brake pads must be changed.
As the Stabilitrak controls the steering wheels, it will signal you when something happens.
Engine Mount Issues
The motor mount links the engine to the frame of the car. It is intended to keep vibration and engine noise out of the passenger area.
The mounts deteriorate and may alter when the model vehicle is put in park or neutral positions.
The shaking may become more noticeable when in gear. Damaged motor mounts may contribute to bigger issues in the driveline and must be handled as soon as possible.
Suspension Issues
Front suspension problems may trigger your car to tremble or shake.
When it occurs, the vehicle could regularly behave when halted but will start vibrating when you adjust speeds or move over obstacles.
Suspension issues can also be followed by strange sounds such as clunks, squeals, and squeaks.
Again anything related to the braking or traction has something to do with Stabilitrak. As the issue arises, the system will alert you.
What Are The Causes of Stabilitrak Car Shaking while Idle?
There are numerous causes why the Cruze could shake while idling. You should use a code reader first.
You’ll be able to limit the list of reasons. Some problems would indirectly affect the Stabilitrak. However, this system controls most sensors and traction systems.
Thus, when the car shakes, it may illuminate the alarm light.
Ignition Misfire
Spark Plugs
The ignition mechanism ignites the air-fuel combination that is in the combustion chamber. When the Cruze doesn’t get a solid ignition, it will tremble and attempt to keep operating.
One of the frequent parts in the system that cause the issue is clogged spark plugs. Even though most modern cars apply iridium ones, they must be replaced at Chevy’s suggested intervals.
Coil Packs
Coil packs are used in virtually every model and engine. The powertrain control module or PCM fires them at exactly the right moment.
When a coil pack fails, it causes a failure and a choppy idle. The Cruze will operate rougher, but it is most noticeable when idle.
Spark Plug Wires
Spark plug wires are no longer standard on all cars (the majority are coil-on plugs). However, for Cruze cars having them, they may become faulty and produce a rough idle.
It may cause the ignition timing to be incorrect.
Vacuum Leak
Suppose the Cruze’s engine is operating; it generates a vacuum. Because of input from the MAP or MAF sensors, the PCM knows exactly how much air achieves at the engine.
An inappropriate amount of air will cause your Domestic vehicle to vibrate during idle.
Engine Timing
When the chain and the timing belt jump a tooth, the crank and crankshaft(s) will no longer be correctly aligned. It can result in significant engine shaking.
Air Fuel Mixture
The fuel injection mechanism in the Chevy Cruze breaks down the gasoline into a thin mist.
When a fuel injector becomes clogged or malfunctions, it will either allow too little or too much fuel into the chamber.
There are numerous reasons why a gasoline injector may fail and various signs depending on how they failed.
Improperly Balanced Engine
When the harmonic balancer breaks, the Chevy Cruze will shake at idle. This Service Stabilitrak car shaking may be less noticeable when the crankshaft rotates quickly.
What Do People Say About Service Stabilitrak Chevy Cruze Shaking?
Let’s see what people say about the Chevy Cruze shaking while driving. You may face the same problem, and their solutions may be helpful.
2012 Chevy Cruze Service Traction Control
While I braked at a traffic light, the traction control notice appeared on my dashboard. I could drive over and switch off the vehicle.
It shakes during engine idles. Plus, it had a noisy sound when I released or pushed the brakes.
I replaced the map sensor as well as the fuel injector. Except for the check light remaining, everything is fine. I’m thinking about taking it to be repaired again.
2017 Chevy Cruze Service Stabilitrak And Check Engine Light
I had a 2017 Chevy Cruze, and the service Stabilitrak engine light flashes constantly. It vibrates strongly before turning off.
I replaced the spark plugs, but they did not work. I think I need to take it to a repair shop for a thorough inspection.
2017 Service Traction Control Chevy Cruze Car Shaking
The vehicle began to vibrate and shake shortly after ignition. After a few seconds, the traction indicator appeared. I turned off the car and reactivated it.
The vehicle vibrated briefly before smoothing out. I ran it near the block, and it appeared in good working order. I turned off the traction control system, and it stopped vibrating.
However, the system is important on slippery roads. Thus, I took it to a repairman for examination, and the problem was an air leak.
Conclusion
Those who experience service Stabilitrak Chevy Cruze shaking, don’t panic. You can check your car first with the code scanner to see where the problem is.
In case you find no way to locate the issue, you’d better take it to qualified professionals for a thorough inspection service.