In addition to its luxurious appearance, Lexus also offers an impressive interior system and an extremely smooth driving experience for the passengers inside.
But one day, you have problems with push button start and cannot start your four-wheeler. So, why does your Lexus push button start problems?
The key fob is a “shortcut” to start the car quickly, but sometimes it can’t avoid problems with how it works.
Scroll down to the content below, and I will provide you with the most useful information about the cause and how to solve this problem.
What Is Lexus Push Button?
The push-button start key fob acts as a tool to assist in creating the car remotely. Just push a button, and it sends a signal to the ignition even when you don’t brake your vehicle.
The engine will run smoothly as usual until you put the park gear in the parked position.
The engine won’t start until you hit the push button and put your foot on the brake. Therefore, it can protect the vehicle from the risk of theft and accident.
Some smart keys also have an alert function that activates whenever the driver loses their key.
Even if the smart key battery is depleted, the keyless ignition lets you start the vehicle normally.
Push-button start is only available on vehicles with keyless ignition, common to Lexus, Rolls Royce, Mercedes Benz, and Acura.
Today, this keyless ignition system is especially appealing to older drivers or people with arthritis than manual locks because they have difficulty holding the car keys.
Why You Have Lexus Push Button Start Problems?
The top cause to blame for Lexus car push button start problems is the faulty push-button start system.
If testing shows it’s okay, you must focus on the dead battery, bad starter motor, and dead key fob.
Let’s learn more about these trouble sources through the content below.
Defective System
If there are no signs of deterioration on your car components and fob, the likely cause of the failure is the push-button start system.
Whether the problem is a start button malfunction or a programming issue, you will need to seek the help of a highly qualified technician to troubleshoot this serious system problem.
Bad Battery
The fob works, but the vehicle’s engine does not rotate is a common sign of a dead car battery.
To confirm the problem, you should use a voltmeter to measure the vehicle battery voltage in the engine bay.
If the test result is lower than 12.4 volts, your Lexus does not have enough voltage to start.
The two most considered workarounds would be connecting the battery to a charger or using a new replacement.
Starter Problem
Any vehicle cannot start with a faulty starter motor. If this cause is in your doubt, try to jump to it directly.
A starter still won’t crank your engine; you’ll need to replace faulty components (relays, modules, coils) or even replace the starter motor with a new one.
Dead Key Fob
If the system detects that your smart key is in the car, you cannot get in the car without the key.
Once the key is out of battery, the system will also not be able to recognize you in the car, resulting in an inability to start the vehicle.
To fix this problem, put the fob on the start button and then press down.
This method only allows the engine to start temporarily, so replace the key fob battery for the fob as soon as possible.
How To Solve Lexus Push Button Start Car Problems?
If you have a Lexus ES push button not starting, don’t worry.
First, check if your smart key is out of battery. If this misfortune happens, do a button push, and pull out the keychain on the fob to completely disassemble the mechanical key from the fob.
A lock will be dedicated to this mechanical key on the driver’s side doors. Once inside the vehicle, hold down the button on the fob, press the brake pedal, and press the button to start the fobs.
The coil inside the starter button can generate enough pulses to form a steady current in the key, which is responsible for generating the code from the key, turning off the immobilizer, and starting the car’s autostart process.
And now you will be able to drive as usual!
If the smart key does not allow shutdown, press and hold the start button for about 3 seconds.
Instead of disconnecting the key fob battery, this method will enable you to turn off the Prius and the vehicle’s combined meter.
FAQs
What Are The Disadvantages Of Push Button Start Key Fobs?
Some major disadvantages of a push-button start smart key that any driver should not ignore are:
Newer models mostly offer quiet engines, leading many drivers to forget to turn off the machine every time the keyless ignition system is used.
Leaving the vehicle while in gear can cause the car to lose control when restarting. It can rush forward, leading to an accident between your car and other obstacles.
Push-button start keys are much easier to hack than conventional manual keys.
As a result, tech-savvy car thieves can use artificial intelligence to interfere with the signal from the key, thereby unlocking and activating the car’s power source.
Are Lexus Cars Push To Start?
The answer is yes. All modern Lexus models today have a smart key that helps with remote start.
Press the starter button, complete some formalities with the brake pedal, and your vehicle will be ready to start the journey.
Can You Push Start A Car With A Button?
Sure! If your battery only has enough power to turn on the dashboard instead of running the starter, press the start button twice without stepping on the brake.
Then try to push the car into gear as usual.
Some Last Words
Learning about the principles of driving a Lexus is not enough to control the four-legged friend spectacularly on all roads.
In addition, you need to research more about problems that may arise, such as Lexus push button start problems, because it helps limit the risks related to the startup process.
I hope my article is useful for your future driving experiences. Have a nice day!