Battery Saver Mode Dodge Charger – Things You May Not Know

The Dodge Charger is designed with a battery saver mode at the dash. It can help drivers detect problems related to the car’s electrical system and electrical devices.

In addition, its active state also speaks for many other issues. What else do you not know about the battery saver mode Dodge Charger?

What are its common problems, and how to deal with them? Keep reading to discover more!

What Does Battery Saver Mode Dodge Charger Message Mean?

Battery Saver Mode Dodge Charger

The 2014 Dodge Charger battery saver mode message indicates that your battery is only enough to operate the vehicle at a certain speed. It will control the speed and operating capacity of other parts to save battery as much as possible.

To explain, Dodge Charger is known as a model of automobile manufactured by Dodge. Although designed in various forms, each comes with a 2014 Charger battery saver mode installed.

When the battery saver active lights up and your car can’t start, you can turn the battery saver mode on to turn off certain electrical functions in the vehicle to keep other important components working.

Normally, battery saver mode in Dodge Charger will turn off or minimize the operating capacity of the following electrical components in the vehicle: heater under the seat or steering wheel, air conditioning, and rear defrost system car.

In addition, you also need to turn off the power supply for features and utilities such as day time lights and an infotainment system.

This battery-saving mode is only temporary, so drivers can turn the mode off at any time.

Usually, vehicle owners turn on the 2013 Dodge Charger battery saver mode when their battery is not fully charged, or their battery is running low.

However, if the battery saver message appears without your request, it is possible that the battery level is low or worn out.

What Are Battery Saver Charger Problems?

2013 Dodge Charger battery saver mode

Battery Charge Warning Light Is On

If your Dodge Charger battery saver light suddenly comes on or flashes without your intention, your electrical system is malfunctioning somewhere.

In this case, your Dodge Charger will automatically disable some electrical accessories in your car, such as entertainment devices (radio, air conditioning, and lights in the car).

This will help narrow the scope of electrical damage and avoid disabling other components in the vehicle.

Above all, it will help cars avoid stalling in the middle of the road, sidestepping danger to road users.

In addition, you can also know which part is experiencing electrical failure through the ECU (Electronic Control Unit).

It is a set of electronic circuits designed and installed to analyze signals (including battery charge warning signs), detect problems, as well as control and govern the operation of vehicle components.

Intermittent Electric Flow

It is a problem that drivers often face. Disrupted currents will render the 2011 Dodge Charger battery saver mode ineffective.

The main cause is that the battery ground cable is loose or partially broken. If your vehicle is driven for a long time on bumpy roads and subjected to strong impacts, the cables will tend to come loose.

Besides, after exposure to the outside environment, other parts of the vehicle will be easily corrupted due to dirt and steam accumulation, leading to electrical leaks.

Other Problems

Apart from the common causes mentioned above, driving habits and cycles can also affect the Dodge battery saver mode.

Taking short trips – especially less than 1 mile – but leaving the car idle for a long time (like more than 1 or 2 months) is one of the main causes.

Next, if the drivers do not fully charge the car battery, the saver battery mode will always be in working condition. It is not good for the mode.

Finally, a lousy battery sensor or a bad alternator will also make the mode ineffective. It may receive the wrong information, providing the wrong power source when the mode is on.

Driving without servicing their car and leaving the battery to work for a long time without servicing causes more and more problems.

How To Deal With Dodge Charger Problems?

Dodge battery saver mode

Tighten The Loose Cables And Replace Faulty Sensor

As mentioned above, loose connections are one of the prevalent causes. So when the 2012 Dodge Charger battery saver mode has problems, you need to tighten the connections of terminals, cables, and bolts.

If you find that these parts are damaged or rusty, it is best to replace them to avoid more serious damage later.

Besides, you should check the battery sensor. The battery saver warning light appearing is one of the signals that the sensor has been installed incorrectly or is faulty.

You can check the negative terminal of the vehicle’s battery because the sensor is connected to this terminal. You may also have to replace the sensor when the sensor is damaged or completely burnt out.

Replace The Dead Battery

If you see the 2013 charger battery saver mode lights up continuously but won’t start the vehicle, the actual issue lies in the vehicle’s battery. First, you must follow the manufacturer’s instructions to check whether the battery is dead.

You need to turn off all electrical appliances in the car, including the ignition. Use a multimeter and turn it on at 20V DC.

Attach the black wire of the multimeter to the negative terminal of the battery and the red wire to the positive terminal.

Observe the results on the display of the multimeter. You should charge the battery if the battery voltage is lower than 12.4V. It’s best to replace the battery should you have a full charge but only use it for a short time.

Maintain The Battery Regularly

Regular vehicle maintenance is one of the important things and is a simple answer to help the battery and other parts operate efficiently.

As a result, the battery saver mode in Dodge Charger R/T also maximizes its capacity when required by drivers. It won’t suddenly light up due to something wrong.

To maintain the efficient operation of the mode, you need to reduce the battery load of unnecessary electrical components to a minimum in Dodge journey’s driving.

For example, turn off the lights in the car before it is completely dark, and shut off the radio or car AC when it is not necessary. And remember to check to see if any excess electrical equipment is still active in the vehicle to turn it off.

You also need to control the cycle of the vehicle. It should not be left inactive for a long time.


Can I Drive With The Battery Saver Mode Active?

The battery save mode being on means you want the car to run in optimal battery saving condition, or there are some problems arising in the battery system and related components.

Basically, you can drive in this condition for between 20 minutes and 2 hours. However, it is better to stop the car to troubleshoot.

You can stop to charge the battery or call the dealership check service facility to tow your car to check if there is a problem.

How Does The Battery Saver Mode Affect The Steering?

Why does the Dodge Charger battery saver mode affect the steering? The reason may be that the pulley in the alternator is trapped, causing the power steering pump to work slower than usual.

Unusual noises under the hood usually signify this phenomenon. When the noise is louder, the heated steering wheel may be noticed.


Overall, the battery saver mode Dodge Charger helps drivers avoid high battery energy consumption when the battery is about to run out.

It also helps detect problems related to batteries and surrounding components. We hope the information we provide will be useful to you. See you in the next posts.

Leave a Comment