If you are in common with most people, perhaps you forget the importance of your automobile’s computer. Yet when something unexpected happens, you wish you cared more about it.
The vehicle computer is responsible for many roles in your automobile, from airbags to engine performance.
So many owners are pretty worried when something malfunctions on it, especially for someone who is a first-time Volkswagen owner.
In this post, we will unveil the recent hot topic of reset VW computer after battery change on many car forums. There’s no time to linger; follow us now if you are also curious about this subject!
Why Do I Need To Reset VW Computer After Battery Change?
There are four safety reasons you need to know how to reset VW after battery change.
ECM, which stands for Engine Control Module, controls many parts in the engine.
If, unfortunately, you still notice an engine light on after a battery change, that tells you something goes wrong and you have to replace a certain part.
In such a case, you have to reset the VW computer or ECM to make sure this replacement is really needed.
The process is encouraged when any replacing elements are set up, like a fuel filter or knock sensor, even after diagnosing or checking your vehicle’s air conditioner has been done.
Since the producer’s instruction, each Engine Control unit should be re-setup at least once, which allows your car to have an effective relearning process when installing a new part.
Many drivers shared that their car couldn’t boot up after changing a battery with the Volkswagen car line because their car’s computer hadn’t been reset properly.
This might stem from its alternator that was disconnected improperly before replacing the battery.
The mechanism will trigger some issues with some other electrical parts in the vehicle, especially the charging system.
If you skip resetting your VW computer after a battery replacement, its immobilizer might malfunction. The electronic device is indeed security equipment on your VW.
For it to operate on its right function, you need to disconnect it for around 15 minutes and reconnect it after changing your battery.
How Do I Reset My VW After Replacing The Battery
Compact Guide
When your engine’s car is fully heated up, turn your vehicle off and disconnect all battery cables. Afterward, remove the battery to cut the power.
After a few minutes, reconnect all the cables and reboot your engine. At this time, the past data will be reset safely.
One prevalent and simple resort for this process is to remove the (battery) cable for three minutes.
Next, reconnect this battery, and then start the engine. Don’t forget to check whether the engine light turns off or not.
To test the operation of this light, drive the vehicle around at least a 10-mile run to give some hints for the ECU.
When the engine light comes back on, it will show you an ECM fault code. This gives some information to know the root of the problem and start eliminating some faulty components wisely.
Then, you reset your car’s computer aiming to offer information to the motor control to know the new components and save the new data.
Remember to check the battery cable and have a standby power source before resetting the ECU.
Important Tips
There are some points to note when resetting a VW computer after changing a battery properly and safely.
As the battery is detached, power voltage should be maintained to some modules and the PCM. Never remove the vehicle battery if the ignition key is turned on or the engine is working.
The electrical network will handle a pretty high voltage spike when the automobile battery is unlinked.
In the upshot, once electronic modules take a turn for the worse, your car’s memory begins to have issues and other parts begin to malfunction.
So when you intend to detach the battery, you need to have second thoughts carefully.
Moreover, you should learn when detaching the automobile battery, which could trigger some below issues:
- Some troubles when warming the engine up
- Some problems regarding the car’s drivability
- The trouble with air conditioning (for example, the car AC stops working when it’s hot outside)
- Problems with energy-accessory features (sunroof, windows, doors, seats)
- Warning lights run improperly
- Electronic modules are damaged.
On many latest car versions, resetting PCM after disconnecting the vehicle battery is much more helpful than only formatting the old memory.
It will delete even learned data required for some modules to function correctly.
So, it would be better to get exactly what information you need and what situation might go wrong when undertaking this step.
In addition, when the battery is removed, the motor might operate poorly. Also, when modules are affected, which can impact the right function of airbag systems.
Hence, you need to closely check your vehicle’s safety equipment before accompanying it again.
In some automobiles, changing the vehicle battery lies under the necessity of applying a scanning device to enter the new battery data into the computer (Powertrain Control Module-PCM).
The car’s charging system is engineered to raise the charging speed in proportion to its battery age. Therefore, the presence of the scan tool is necessary to ensure the accuracy of the replacement.
How Do You Reset The Computer On A Volkswagen Jetta?
You can utilize an OBD-II connector/ scanner that plugs into the vehicle’s computer to reset your Volkswagen Jetta computer.
Many experienced experts suggest this tool in this process for most Jetta versions.
When your scanner is plugged into, switch the ignition on, hit the power button, and press reset on this scanner. This step allows your car to reset and know about the new part.
In case you don’t own a scanner labeled OBD-II connector, any diagnostic code readers can help. You can use the reader to connect to your VW computer and find any error codes that could be present.
However, there are loads of dice out there with many identical to the real ones on the current market, so you need to be aware to learn carefully before choosing a device.
And don’t skip scan the compatibility with your VW Jetta.
If you don’t feel confident about resetting the car computer or have any queries about the VW Jetta, asking for help from an experienced mechanic is a wise option.
They are capable of solving any problems with your VW, including VW battery replacement reset. This way, you might ensure that your vehicle is operating properly and its functions are running smoothly.
Bottom Lines
Some hot queries like how do I reset my car after replacing the battery in general or how to reset VW Jetta after battery change, in particular, have been addressed in the content.
We are confident our blog today satisfied your interest earlier.
Also, you should pay more attention to your VW, especially the car computer, as well as its mechanism in “Reset VW computer after battery change“.
Otherwise, your vehicle might face some expected issues on its coming run.
Well! Time to say goodbye after walking through the practical post with us. Don’t hesitate to share this content with those who own a Volkswagen; we believe they will need it sooner or later.
Thank you, and see you soon in our next blogs.
I had to replace my battery in my 2019 VW Passat Wolfsburg Edition and my navigation system is not appearing on my screen, so I am presuming it needs to be reset. How is that function done. Thank you for any assistance you can give me with the proceedure.
You’re welcome Robert!