High-tech devices are included in your Chevy Equinoxes to guarantee a smooth ride and safety. A typical traction control system is Service Stabilitrak Chevy Equinox.
It can prevent you from colliding while skidding and is one of the most cutting-edge and important safety features on your Chevy Equinox. Continue reading!
What Is Service Stabilitrak?
Driving on slick roads can be incredibly risky. A driver might swiftly lose control of their car with only one false action.
Traction control systems were developed to adjust a car’s position, and veering was prevented.
This electronic stability control system or traction control lights expand on the idea and gives the driver more control over their vehicle.
GM’s proprietary electronic stability control (ESC) system is known as StabiliTrak or service traction control.
Nonetheless, comparable systems with various names are used by other automakers.
Like the traction control system, the StabiliTrak system performs an essential task and is a powertrain control module. It aids in ensuring your safety when driving, particularly on slick roads.
Unfortunately, many are unaware of how it works or what it signifies when the dashboard service StabiliTrak light illuminates.
Fundamentally, Stabilitrak can assist you in maintaining safety and greater control of your GM vehicle in any circumstance that might result in you losing control, colliding with anything, or even dying.
It would help if you did not disregard it because it is a warning sign for safety. When you continue to drive while ignoring it, you can put your life in danger.
Service Stabilitrak Chevy Equinox: How Does It Work?
Using sensors to establish their positions, Stabilitrack will check if the steering wheel and tires are pointed in the same direction while the automobile moves.
Failure of the StabiliTrak system could indicate a variety of common issues.
For instance, if your automobile travels right while the wheel and tires point to the left, StabiliTrak activates the brakes on the border.
The outside brakes are applied to realign the car. It is one of the many ways the StabiliTrak may assist you.
The steering wheel position sensor must transmit information regarding the driver’s intention for the Chevrolet StabiliTrak to function.
By contrasting the wheel’s position with the actual steering response, the oxygen sensor corrects the direction of the car’s movement.
So, a StabiliTrak issue reported by Chevy Equinox could alter how this feature operates.
It improves the stability and safety of the passengers in the vehicle when it’s working properly, particularly when driving on slick surfaces.
If a sensor fails, you will be informed of a problem. Even though this is typically not a dangerous condition, you still want the underlying issue resolved.
What Causes The Service Stabilitrak Light On Chevy Equinox To Come On?
Defective Steering Wheel Sensor
The StabiliTrak light could turn on for various reasons.
The most frequent complaints are related to faulty sensors, which prevent the system from receiving the information it requires and cause it to shut down.
To swiftly fix the problem, a code scanner can provide a trouble code indicating which sensor is malfunctioning.
Along with your input sensor, your car’s power steering sensor operates. It is because it informs the ESC of how much assistance the power steering system in your vehicle is currently providing.
Your car might be unable to detect whether more or less support is needed if this sensor malfunctions.
Bad Fuel Pump
Supplying fuel from the fuel tank to the engine is the responsibility of the fuel pump.
A straightforward process that is readily jeopardized when external problems impact the pump’s performance.
With the fuel pump failure, your car will have serious performance and drivability problems, which lead to loss of engine power.
The cylinders won’t receive enough fuel, the pistons won’t fire, and your engine will struggle to propel the car ahead if your fuel-to-air ratio is incorrect.
If the pump is poor enough, your car won’t start, and the Service StabiliTrak Equinox light will turn on.
Brake Switch
The brake light switch is one of many potential causes of the Stabilitrak light. A broken brake light switch might result in a variety of problems. In bad control, the brake lights won’t function.
A damaged brake light switch can prevent a car with a push-button start system from starting.
A brake light switch may frequently continue to operate inconsistently. The Check Engine or ABS framework warning light may turn on.
The brake pedal switch may not always need to be pressed for the brake lights to turn on intermittently or randomly.
Battery Issues
Battery problems can also cause StabiliTrak problems. A dead battery is the most frequent reason a car won’t start and displays the “Service Stabilitrak” warning.
It can be brought on by leaving the interior or exterior lights on overnight, by an alternator that must be repaired, or by a weak battery that needs to be changed.
The StabiliTrak System must have the power to function; if it doesn’t, the system will be turned off.
ABS Braking Issues
Most ABS issues arise in case of sensors contaminated by metal shavings or other particles. Once sensor wiring is harmful, malfunctions happen, and sporadic or no continuity occurs.
When ABS lights malfunction, they may act erratically, pumping the brakes even when driving normally and making odd clicking noises regardless of whether the brakes are not applied.
Drivers should watch out for the problem of ABS sensor failure, even though brake-related issues are uncommon.
Turning the ignition key on and off is the first thing to do if the StabiliTrak light is indeed an ABS code warning.
E85 Fuel
After running out of E85 gasoline and switching back to regular petrol, many people notice that their administration StabiliTrak light has disappeared.
The StabiliTrak light and check engine light turn on when conventional fuel is refilled, so it’s something to remember, especially if you recently filled your tank.
There aren’t any immediately noticeable fault codes or fluid levels.
How To Rest Service Stabilitrak Message On Chevy Equinox?
There is a problem, as shown by the Service StabiliTrak error message.
When the service StabiliTrak warning light on your automobile illuminates, it is time to consider a potential solution to the problem.
The activities listed below will help you fix the problem because the StabiliTrak warning light is a malfunction indicator.
Without A Scan Tool
- Step 1:
The foremost thing you need to do when the StabiliTrak warning light displays on your dashboard is to find a safe area and pull over or stop.
- Step 2:
After locating a secure spot to stop, turn off your car for 20 to 40 seconds to allow all systems to recharge. Think about the weather patterns and the state of the roads. The warning light might be on if there is a cause why the system should be automatically disabled.
- Step 3:
Turn the wheel in a clockwise direction. If the light disappears, your car doesn’t need maintenance. Continue with the next steps if the light is still on.
- Step 4:
Start the car after the advised amount of time. You should see the warning light go out after doing this. You don’t need to service the vehicle stability if the message has disappeared. If not, it’s time for a thorough diagnostic.
In case it persists, it’d better seek the advice of a qualified auto repair to carefully identify the potential check StabiliTrak system component malfunctioning and hence projecting the warning light.
Your StabiliTrak system can be broken if you try to reset it, but the light stays on. The plan likely has a faulty connection that needs to be repaired.
Depending on what’s causing the malfunction, you can pay, on average, $200 to $550 to fix a Service StabiliTrak alert. Service StabiliTrak warns that there is no obvious cause for this. Understanding potential reasons before choosing the next step is anything but a wise decision. In the improbable event that none of these solutions work, it is advised that you take your car to a nearby mechanic.
With A Scan Tool
- Step 1:
Plug in your auto diagnostic scanner and turn off the ignition. The Autel MS300 or the iCarsoft i900 are our top picks. Then start the scanner after starting the ignition.
- Step 2:
Discover and choose your Chevy model. Let the scanner scan your car for error codes. Read and record all of the fault codes and their descriptions that were shown.
- Step 3:
Turn off the engine power and unplug the scanner. Fix the issues if you can. Confer a mechanic if you don’t have the necessary abilities.
- Step 4:
Connect your scanner backup and start your car once the engine issue has been resolved. Clear the error codes if you want to. Remember that you won’t be able to accomplish this until all the stability-related problems have been resolved with your vehicle.
- Step 5:
After resolving the issues, switch off your vehicle and unplug the scanner. Please turn on the engine after letting it idle for 20 to 30 seconds.
FAQs
Can I Drive My Car If There Is Stabilitrak Service Light?
An issue with the stability control scheme is indicated by the “Service StabiliTrak” warning light. That can be highly harmful to some models. Driving a car is therefore not advised.
Like any other warning notice, the Service StabiliTrak on Chevy Equinox shouldn’t ever be disregarded. It indicates a problem with your car’s stability control system.
You shouldn’t drive your automobile if the warning light is on until you can investigate it. To try to fix this problem, be sure to stop.
What Does It Mean When My Equinox Says Service Stabilitrak?
I will take it in to see if it says “Service Stabilitrak” and if other lights have started to flash. Certain Chevys have had a problem with this.
Some how-tos demonstrate how to remedy it quickly. However, it relies on the specific situation and isn’t always the case.
Another chance is that the issue is with a different system, but it also affects several other methods. For the StabiliTrak system to work, several techniques must cooperate.
Hence, if the traction control fails, the StabiliTrak 2012 Chevy Equinox may become inoperative. Stabiltrak may go offline if the brake system experiences a problem.
The StabiliTrak system may trip if the steering position sensor malfunctions or is not calibrated after a wheel alignment.
How Much Does Stabilitrak Repair Cost?
Although Stabilitrak is a complex technology, repairs are not expensive. Labor typically costs between $30 and $50 for a regular Stabilitrak repair, which costs between $80-200.
That’s not terrible for a vehicle repair, especially considering how intricate some components can be.
But, it could cost up to $1000 to correct a more significant issue, such as a malfunctioning sensor.
Conclusion
Service stabilitrak chevy equinox is a fantastic service for your vehicle.
It would be helpful to pay attention to the service StabiliTrak warning light if it illuminates because the StabiliTrak system in your car helps to secure your safety as you drive.
It might quickly turn into a disaster if you’re not careful. Consult your auto mechanic right away, and have them remedy the issue.