For drivers, keeping traffic safe for themselves and those around them is always a top priority.
Although the tail lights do not participate much in the vehicle’s operating system, they always receive special attention and timely repair thanks to their importance in “communicating” with other cars.
If your vehicle has this problem, the first task you must complete is to study the tail light wire color code thoroughly!
Our article provides you with useful information on how this product works and guides you step-by-step in installing and replacing it at home without the help of a professional mechanic!
How To Determine The Tail Light Wire Color Code?
Usually, manufacturers specify brown as a valid color coding for tail lights.
Meanwhile, they use yellow for the left turn signal, green for the right turn signal, and white for the background.
Thanks to the clear regulation of dodge ram tail light wire color codes, drivers, and mechanics can easily distinguish each type of single wire and its effect.
Besides, they can minimize the risk of wrong wiring causing damage to the entire vehicle wiring diagram.
These four types of ropes form the “four-way rope” group, found in any light and boat trailer on the market today.
Meanwhile, the “five-way wiring” system (higher level) has an additional blue wire (5th wire) connected to the turbocharger and backup lights, commonly found in campers or trailers.
The “six-way wiring” system includes an additional red brake wire for operating the battery and fuse (suitable for horse-drawn carriages).
The “seven-way wiring” group is the top level with the appearance of a purple wire that acts as a hydraulic coupling.
What To Keep In Mind With The Tail Light Dodge Ram Wire Color Codes?
If you’re wondering about the worst that can happen when working with trailer wiring, these include blown fuses, flashing brake lights, or reversing turn signals.
While they can have devastating consequences for the vehicle, fixing the problem is fairly easy.
Make sure the following signal wires are connected to the correct part they support:
- Brown wire: taillight or tail light
- Green wire: Right brake or turn signal light
- Yellow wire: Brake light or left turn signal
- White wire: Chassis or grounding
Normally, the traffic behind often focuses on the taillights of the trailer to adjust the speed in time.
Once the taillights are slow or malfunctioning, other drivers will not have enough time to handle the situation, leading to a high risk of a continuous accident.
Therefore, tow truck drivers must not drive under any circumstances with faulty lighting or wiring.
When you spot the broken tail lights with your vehicle along the road, pull over to the side of the road and contact the rescue team so that repairs can be made on the spot.
How to Install LED Tail Lights for Your Car?
Installing LED lights is like changing lenses for your 4-wheeled friend, giving it a more personal appearance than it originally appeared.
Besides, LED lights have a longer lifespan than conventional tail light tungsten filament bulbs.
Fortunately, the LED taillight installation process is not as difficult as you think! Just follow our steps below to make others jealous of the new look of your vehicle!
Step 1: Remove Old Tail Lights
Most vehicles offer taillights that are bolted from within the car’s trunk. Therefore, the first step for you is to remove the trunk mat and the taillight latch on the inside of it.
Gently loosen the taillight bit by bit to disassemble it completely. Never be in a hurry, or you may destroy the tail light by fixing clips from the inside.
Step 2: Remove The Light Bulbs
After removing the bulbs from the taillight housing, disconnect them from any rear wiring.
For easier identification, it is best to use colored tape to mark the spare bulbs, brake lights, and turn signals. Any mistake in the wiring can paralyze and even burn out your vehicle’s tail lights.
Step 3: Connect The New Lights With The Wiring
Remove your new aftermarket LED tail light from the box and connect it to the appropriate signal ground wire you marked.
Connecting doesn’t take too much effort, and usually, you need to connect the signal wires of the same color.
For example, the available red wire connects to the red wire of the LED taillight, while the 2 black wires connect.
Step 4: Test And Reinstall
After the connection is complete, you must check the turn signals, brake lights, and backup lights to ensure everything is working properly.
If something misbehaves, making the light not come on, review and start the installation process again.
Have someone hold the LED taillights in their original position, or use duct tape if you do this task alone. Slowly tighten the screw and adjust the lamp’s position to achieve the best results.
FAQs
How To Wire 3 Tire Trailer Tail Lights?
To correctly identify 3 tire trailer tail lights, you will probably need to use specialized tools to check the circuit.
Remember the 2006 dodge ram tail light wire color codes as well as their specific use:
- Red wire: Stop/turn
- Black ground wire: Running light string
- White wire: Ground wire (required to connect to a suitable grounding point on your trailer’s chassis)
It is best to temporarily connect the taillight (brown) to the black wire (12V) and check whether the light is working. Then connect the brown and red wires and continue testing.
Normally, the lighter wire will connect to the green (stop/turn right) or yellow (stop/turn left), while the dimmer wire should be fitted with the brown light circuit.
Ensure the blue wire is specifically for trailer brakes and the white wire is grounded to a suitable surface above the trailer’s frame.
Why Do Brake Lights Have 3 Wires?
Manufacturers produce LEDs with 3 colored wires because they want them to be a versatile combination that can work in any situation.
For example, the driver can drive while flashing the trailer lights, drive while braking, or even brake and flash the lights simultaneously.
Are Brake And Tail Lights The Same?
The answer is no! Although they have the same dominant color on some vehicles, if you look closely, you will see that the brake lights tend to be brighter than the dark red of the taillights.
Besides, the tail lights come on as soon as you turn on the parking brake, parking lights, or the headlights, while the brake lights only work when you press the brake.
Our Final Thought
A vehicle with a malfunctioning rear light system certainly does not meet the minimum requirements for traffic, as it has lost its ability to communicate information to other cars on the road.
Therefore, quickly identifying and fixing the problem in time is the key to a safe journey for you and those around you.
Hopefully, through our article, you now have enough useful information about the tail light wire color code and how to replace it at home when this system is in trouble. Good luck with the fix!