What Should You Know About The 4l60e Check Ball Location?

The 4l60e check ball location is one of the typical components of the check valves. A ball check valve uses a spring-loaded ball and free-floating on the sealing seat.

The ball is displaced from its position and enables flow when the hydrostatic flow at the input edge surpasses the splitting force.

Once the inlet pressure switch can not exceed the splitting force, or if backpressure exists, the ball will lock via the spring, backpressure, or closing the orifice.

What else should you know about the 4l60e check ball location? This article will provide you with deeper insights into this topic. Scroll down for details!

What Should You Know About The 4l60e Check Ball Location?

4l60e CheckBall locations are one of the popular designs in the check valves that are an important part of an automatic original transmission.

They are responsible for diverting flow into or restricting flow from the specified pathways. Although they aren’t very complicated in terms of function or design, you should be careful to avoid serious technical problems when using them.

Sometimes, you can find the check ball location chart in the worm track of a select valve body casting or gearbox with a pair of attached transgo separator plate ball seats.

The eighth check ball regulates the 2-4 band pin application during 2-1 downshift or during a band pin of 1-2 shift up when it’s working properly.

What Does 4l60e Transmission Check Ball Location Do?

There are various valves inside the original transmission’s valve body that conduct trans fluid through the device. A check ball plays a critical role in designing valves in various valves.

With the support of check balls transmission, these valves can allow or impede the fluid passage. Hydraulic pressure can make a check ball unblock or block the hole the trans fluid is attempting to flow.

Despite the simple function of a torlon check ball, its quality depends on its material.

Steel checkballs or steel balls are prone to corrosion of the plate’s seats, resulting in imperfect orifice outer servo seals.

Rubber or elastomer check loose balls degrade and result in a poor fit to the holes in the plate, or a full check ball blows the hole in the plates.

What Is the Function Of Valve Body Check Balls?

The valve body check balls are one of the components that allow automatic transmission to make a proper function.

The original 4-3 sequence valve body can trigger the right clutch pack for the gearing by diverting hydraulic circuit fluid through a path network.

There are different valves responsible for the shift in the replacement valve body. The valve body has a close connection to the vehicle’s shifter because it is also responsible for identifying whether the vehicle reverses or is in driving.

How Many Check Balls Does 4l60e Include?

There are seven check balls in 4160e. They apply the oil pressure on an oil flow circuit at the right time, release force from an oil flow circuit, and switch or redirect trans fluid flow.

What Are Signs Of A Bad Transmission Valve Body Location?

You can not drive your vehicle for a long time if the original valve body has bad symptoms.

There are abnormal signs of the poor 4l60e valve body check ball location that you should notice, such as strange noises and hard gear change.

Below are some common indicators of a poor original valve body: 

Faulty Gear Change

The valve body is the important control device for changing gears in an automatic gearbox. This is built to respond quickly to the throttle position you’re using.

It also swaps gears at the appropriate output speed to maximize fuel efficiency.

Yet, if your car’s shift kits are inopportune and it reduces fuel efficiency, it could indicate a faulty valve body location.

In this case, you should send your automobile to maintenance for a thorough examination to prevent serious problems.

Transmission Problems

Clutch sliding is no stranger to manual-transmission car owners. Yet, this is not a positive indicator if you drive a vehicle with an automatic transmission.

Sometimes, this sign of wear occurs if you attempt to speed up your automobile by dropping the throttle pedal, but your car does not accelerate.

Thus, the gear can not engage effectively and begin to slip as you reduce the throttle.

Knocking or Banging Noises

When you detect banging or engine knocking noises while changing gear, such as from opposite to reverse or drive, your transmission valve body plate can malfunction.

When you hit the brake, you can also hear these strange noises.

If you detect strange noises when you control the braking system, it is not the matter with your transmission valve body plate.

But, if it occurs when shifting gears, you should think of a bad valve body spacer plate.

Hard Shifts in Gear

If your car’s gearbox valve body spacer plate is bad, shifting gears becomes tougher. Easy gear changing is available for every automatic car to increase the driver’s convenience and enjoyment.

Not Switching Gears

Aside from incorrect gear changes, a malfunctioning gearbox valve body can cause your automobile to get a wrong shift.

If you know how your automobile works and how it shifts gears when you slow down or speed up, you can notice this symptom.

Transmission Fluid Leakage

If you have a car with a loss of fluid valve body system, you should spot this sign. Transmission fluid leaks are uncommon, but the valve’s body ceases to a proper function if they happen.

Sometimes, you should inspect for leakage.

Incapable of Downshifting

When your automobile doesn’t downshift if a gearbox 4-3 sequence valve body is in trouble, the fluids are unable to move to the proper location, and the car can not compress the gears to shift down.

It not only ruins the journey but also reduces your engine’s gradual performance degradation. Besides, you can find it difficult to keep a steady output speed on the roads or accelerate the automobile.

Check Error Codes

You can find lots of error codes that tell you exactly what is wrong. P0715, P0829, P2707, P0783, and P0751 are the most common error codes of the wrong transmission valve body.

You should consider these codes because they result in a faulty transmission valve body with irreversible and devastating effects.

Can You Drive With A Poor Transmission Valve Body?

No, you shouldn’t drive until you can solve this problem because a bad select valve body can affect your safety (and others’) when you are on the road.

Driving a vehicle with difficulties for a long time is not a smart idea, so you need to check engine light based on a tech guide for further problems.

Skipping the examination of the engine light or ignoring the potential issues related to 4l60e transmission check ball location, you can face further troubles.

So, you should bring your vehicle to an auto repair store , trans shop or ask tech agencies with the quick question if you detect abnormal symptoms when you check engine light.

Is 4l60e Valve Body Check Ball Location The Same To Others?

Because of being updated throughout time, the 4l60e case check ball location is not the same as the others.

The types of 4L60E include TCC Lockup solenoid, shift to 4th, shift indicator quadrant, paddle shift, Pan.4. 1-2 shift are different.

Where Can You Find 700r4 Check Ball Placement?

You can see a long code reader number on the case of the 700r4 check ball location diagram near the metal oil pan in the back.

The number indicates the year and month in which the trans appeared and the version code. The enormous cast-in MD-8 is the RPO code, but it doesn’t tell you anything specific.

What Is the Function Of a Torque Converter?

The torque converter shudder plays the same role as the reverse clutches in a manual gearbox. It transports the rotating power to a rotating driven load in the internal combustion chamber.

The torque helps connect the power source to the load of a car with automatic transmission.

The engine gets a connection to the rear wheels for the automobile to run. It can be removable to continue running after the vehicle stops.

A clutch, which physically disconnects and connects the original transmission acts and engine, is one gadget to do this.

Another option is to use a trans fluid connection, including a torque converter shudder, that sits between the original transmission and the engine.

What Are 4l60e Torque Specs?

Location	Torque
Accumulator Cover – Case Bolt	11Nm (8 lb.ft)
Detent Spring – Valve Body Bolt	24 Nm (18 lb.ft)

Conclusion

We’ve covered everything you should know about the 4l60e check ball location to use your vehicle effectively.

The check ball plays an important role in helping your engine get a proper function and controlling hydraulic fluid.

Apart from knowing its function, you should also monitor your “service engine” problems, check engine light frequently to detect serious faults in your vehicle.

This way, you can find the best solution for each issue to minimize your car’s gradual performance degradation and ensure your safety on the way.