What if Service StabiliTrak Chevy Equinox car won’t start?
Not everyone knows and has experience with this problem, but it is common for Chervolet drivers. That is why you should not ignore it; you may need it soon!
Even when you’re an amateur, don’t worry about it. We are here to help. All the answers will be revealed right now with our step-by-step guidelines. Let’s learn more about it!
About StabiliTrak
What Is It?
Not just your Chevy Equinox, but several models have StabiliTrak. It is an electronic stability control system that aids drivers in maintaining control under difficult circumstances.
This system uses sensors to recognize when your vehicle is losing traction to keep the car on its intended course.
After that, it automatically applies the brake pressure on certain wheels. To aid the driver in regaining control, it also lowers engine power.
- When driving on wet, snow, or slippery roads or when making rapid maneuvers like swerving to avoid obstacles, its error message is very helpful.
- Drivers can stay safe on the street and prevent accidents with the assistance of the Service StabiliTrak Chevy Traxis system.
- Moreover, it helps drivers maintain control, whether pulling a hefty load or traveling through other situations that may impair a vehicle’s stability.
- The system integrates with the car’s traction control and ABS systems to give drivers the most power and stability possible.
Engage the traction control system or push the StabiliTrak feature’s button to turn it on.
The technology then continuously analyzes the car’s motion and acts if it detects traction loss. When an issue is discovered, the system immediately reacts to fix it.
Does It Affect Your Engine?
No, it won’t harm your engine.
As mentioned, the system can reduce power if it senses that the car is not following the driver’s orders. This may occur when sharply swerving or turning to avoid something, among other circumstances.
It is crucial to remember that it will only cut engine power when it is essential and there isn’t any other way to maintain control of the car.
Hence, when using it properly, you shouldn’t experience negative performance differences.
And now, it’s time to know why the Chevy Equinox Service StabiliTrak won’t start!
Service StabiliTrak Chevy Equinox Car Won’t Start
Your StabiliTrak car won’t start; what’s the problem? As usual, people will diagnose the four common causes that include defective alternator, faulty system controller, input sensor repair, and failed connection.
Lousy Alternator
2011 Chevy Equinox Service StabiliTrak can hint that your vehicle is facing the issue of a failing alternator.
If your car has a bad alternator, that is a frequent reason why the indicator illuminates. This indicator may switch on days or weeks before other components are damaged.
It would help if you got your alternator diagnosed as quickly as possible.
Faulty System Controller
A malfunctioning system controller is another typical cause of illuminating the 2011 Equinox Service StabiliTrak indicator.
This can be quickly fixed by resetting the car’s computer. You should go to the dealership for this task, though.
Input Sensor Repair
What does the Service StabiliTrak car won’t start mean? Its notifications appear when an input sensor malfunctions. The steering angle, turn rate, or wheel speed may cause this.
So that these faults don’t worsen, you should have local professionals replace these faulty sensors immediately.
Failed Connection
A broken connection is also another frequent cause of this warning indicator. For instance, an issue might arise if the negative battery wire was detached and rejoined.
Before you go hit the road again, allow the computer in your car some time to recognize and implement the modifications. It can fix the 2011 Chevy Equinox StabiliTrak problems.
How to Reset Service StabiliTrak Message
Can StabiliTrak cause car not to start? Certainly!
It can come from the reason we mentioned above, and you can try to fix it yourself.
Pay attention if the engine light appears on the dashboard as the system is malfunctioning due to a hardware or software issue.
You should perform a complete diagnosis on the system to identify the issue before attempting to turn it off. Warning lights are used to warn you of impending danger.
Once the checkups are finished, here is how to fix the issue.
- Its button should be checked. It will stay lit if it has been physically pushed in.
- Think about the weather and the state of the roads. The warning light might be on if the car is in unfavorable road conditions.
- Turn the wheel in a clockwise direction. If the light goes out, the system most likely isn’t malfunctioning. Continue with the next steps if the light is still on.
- Put the car in park. For about 15 minutes, go somewhere else and do something else. This period allows the system to restart.
- Start the car again. You don’t need to service the vehicle if the message has disappeared. If not, it’s time for a thorough diagnosis at a nearby repair shop.
FAQs
Can I Drive My Car With StabiliTrak Message?
Yes. Nothing is amiss if you’ve disabled StabiliTrak, so feel free to continue driving as usual.
But be aware that without traction control, when the system is disabled, you can notice the tires skidding and spinning in slick conditions.
It must be examined if it stops working due to a defect. Don’t assume that the driving conditions would be safe until the fault codes have been diagnosed.
How Much Does It Cost To Repair Service StabiliTrak System?
StabiliTrak repair cost of a Chevy Equinox will depend on labor, service, accessories, and other fees (if any) at the repair shop and in your area. However, these repairs might charge you from $200 to $1,000.
Where Is The Traction Sensor Located?
Depending on the vehicle, its sensor locations can change. A variety of sensors, either close to the wheels, under the hood, or within the car, are used to keep track of a vehicle’s stability:
- Wheel speed sensors track each wheel’s rotational speed and provide that data to the control module.
- It receives information about the turning rate of the vehicle via the yaw rate sensor.
- The steering wheel position sensor receives information about the steering wheel’s angle, for example, when the wheel is off center.
- The accelerometer measures the acceleration and transmits this data to the control module.
Bottom Lines
In short, when you see the Service StabiliTrak Chevy Equinox car won’t start, you can fix this by resetting the warning light first. The problem can be solved easily if it’s a system error.
For more serious issues, you may need help and more careful inspection by professional mechanics.