The 2017 Chevy Cruze is a compact automobile that is either a hatchback or a sedan.
It boasts an excellent entertainment system on par with those seen in more expensive vehicles and delivers segment-best fuel efficiency.
Besides that, the transmitter pocket Chevy Cruze 2017 is also considered the most beneficial improvement for drivers. I will give you a detailed explanation.
What Is A Transmitter Pocket?
The traditional method of starting an automobile entailed the driver placing a key into a lock and rotating it.
In today’s world, many more techniques exist to start an automobile than those described.
Chevrolet’s Malibu and Enclave both come standard with transmitter pockets. A driver’s key and FOB are stored in this key pocket location.
The FOB assists in operating the car when placed in the transmitter pocket.
Transmitter pockets are necessary for automobiles because when the battery of the key fob eventually runs out, the vehicle may still be started via its transmitter.
The key fob in the pocket triggers the transmitter to crank up the car’s engine.
What Is The Transmitter Pocket Chevy Cruze 2017?
A transmitter pocket Chevy Cruze 2017 is a tiny box that contains the driver’s key fob. This compartment is considered a backup when you need to start the car with a dead battery key.
The transmitter pocket will detect the key and start the cars.
In Chevy Cruze 2017, no mark indicates the transmitter pocket’s location; it has been relocated to the front cupholder.
How To Use Transmitter Pocket To Start Chevy Cruze?
In case your internal battery of the key fob is dead, I will give detailed instructions to use a 2017 Chevy Cruze transmitter pocket to start your car.
There are two main things you have to do, including:
Get In
You cannot get in your car when your remote key is not working. However, you should know that there is a hidden key in your dead key fob.
Here are the ways to can use this key to get in your car:
- Take the mechanical key by slipping out of the fob. However, some lower-end variants may still employ a flip key. To get the key out of the fob, you’ll need to find the button on the side, press it, and then pull the keyring side with your free hand.
- This model doesn’t seem to have a keyhole. The lock cylinder is hidden by a cover at the back of the driver’s door handle, which must be removed.
To take off the cap, push the mechanical key into the slot at the bottom of the cap as far as it will go and pry it outward.
- It may seem like you’re prying off a part of your automobile when you remove the cap, but this is normal and required.
- To remove the cap on certain earlier Chevrolet models, you had to take out the handle. However, the projection is no longer there, and the handle is unnecessary.
- Turn the mechanical key in the keyhole to gain access. Now, you can get in your car.
Start
If the vehicle’s interior engine lights are disconnected and you can’t get it started, the 12-volt battery may be dead. In this case, you’ll require roadside assistance.
But, if you want to try to start your car, here are my ways with the Chevy Cruze transmitter pocket:
- You have to relocate the transmitter pocket in front of the cup holder position. It has been relocated to the front console in the 2017 Cruise.
- Drop your key fob into the cupholder to activate the car even though the key fob battery is dead. That’s how to use the transmitter pocket to start the Chevy Cruze.
Why Is The 2017 Chevy Cruze Key Fob Not Working?
The 2017 Chevy Cruze key fob not working is common, mostly due to the problems with the battery key fob, signal interruption, or a dead/weak car battery.
I will explain the most prevalent reasons in detail below.
The Cell Battery Within The Fob Has Run Out
Most key fobs won’t operate because their batteries are dead. The cell battery often used in key fobs has a 2–4 year lifespan and exhibits a gradual decline throughout that time.
The battery is about to die on your key fob if you’ve noticed that you must push the buttons numerous times to act or that the signal range has gradually diminished.
Interference In Radio Frequency
The Chevy Cruze key fob is radio-frequency (RF) operated like most other key fobs.
Since many modern gadgets, including cell phone towers, use radio frequency or produce radio signals, these devices may sometimes disrupt the Cruze key fob’s transmissions.
If the receiver doesn’t pick up the right signal, the key fob won’t work.
Car Battery Issue
The BCM (Body Control Module) is the brain of the automobile; the car battery powers it and all the electronics of the vehicle.
As a result, the key fob will be ineffective if the car’s battery is dead or malfunctioning for any other reason.
Your car’s manufacturer or a trusted technician will be able to further analyze the issue and advise you on whether a new battery is required or whether the present one can be repaired.
The Ignition Switch Cover Is Locked
Even with the key in the physical ignition hole, the car will not start. If the key is left in the “Lock” position, the automobile will remain locked until the lock is manually released.
That’s why it doesn’t matter how hard you attempt to turn the key in the physical ignition hole if it’s locked.
This implies that it will work even when the battery in the key fob dies. It seems to be a really bad scenario.
Key Fob Unprogrammed
The onboard computers of a Chevrolet Cruze may need to be disconnected from the main vehicle battery for several minutes to reset.
Because of this, the system can reset all key fobs, rendering them useless until they are reprogrammed.
Receiver Error
A malfunctioning in-car receiver might be to blame if your key fob stops responding after you have tried the troubleshooting steps mentioned above.
If you have any doubts about whether the problem is with the transmitter or receiver, you can visit your nearby dealership, where key fob tests are available for free.
2017 Chevrolet Cruze Remote Fob Programming Instruction
First and foremost, ensure the car’s engine is turned off and you have all of the smart keys (both old and new) before beginning key fob programming.
Programming With Two Working Smart Keys
The owner’s manual is a great resource for finding information unique to your car. For example, a car may have up to 8 smart keys programmed into it.
- Disassemble the emergency blade from a functional smart key.
- Put the two functional smart keys in the cup holder.
- To open the driver’s door, place the emergency key blade into the cylinder and spin it five times counterclockwise to the unlock position for approximately 10 seconds.
With certain cars, the driver’s door lock can only be accessed by removing a cap covering the lock cylinder.
- Put the new smart key in the vehicle’s transmitter pocket.
- Activate the ENGINE START/STOP switch. When the car detects a new smart key, the DIC will indicate whether it is ready to accept a new key fob programming.
- Take the smart key out of the transmitter pocket and either push the LOCK or UNLOCK button.
- Repeat Steps 4-6 to set up a second smart key.
Once all smart keys have been programmed, you may quit key fob programming mode by pressing and holding the ENGINE START/STOP button for around 12 seconds.
Programming Without Two Working Smart Keys
Here’s what to do if you’re down to one functional smart key or have none. It will take around 30 minutes to finish this operation.
A locksmith may be required to cut the emergency key blade in your new smart key if you do not already have any keys for your car.
- Take the emergency blade out of your old and new smart keys.
- Within 10 seconds, insert the emergency key blade into the driver’s door lock cylinder and crank it five times counterclockwise to unlock.
To access the lock on the driver’s side door, you may need to remove the lock cylinder cover (this is the case in certain automobiles).
- Press the ENGINE START/STOP button after waiting 10 minutes for the DIC to read and display the PRESS ENGINE START BUTTON TO LEARN. The REMOTE LEARN PENDING, PLEASE WAIT will then pop up.
- Step 3 should be repeated twice more. After the third use, the car will no longer recognize any previously used smart keys.
In the next procedures, the remaining smart keys will be reprogrammed. At this point, READY FOR REMOTE # 1 should appear on the DIC screen.
- Put the new smart key in the transmitter pocket.
- Choose START/STOP ENGINE. When the car detects a smart key, the DIC will indicate it is ready to accept a new one.
- Take the smart key out of the pocket and hit the UNLOCK or LOCK button on the key fob.
- Repeat Steps 6-8 to set up another smart key.
When you’re done adding more smart keys, press and hold ENGINE START/STOP for around 12 seconds to exit programming mode.
FAQs
Do All 2017 Chevy Cruze Have Remote Start?
Yes, a remote start is available for all 2017 Chevrolet Cruze. However, battery problems are inevitable during a vehicle’s lifetime.
In addition, it is possible that the casing may fracture and need to replace the battery.
Every 50,000 to 60,000 miles, your remote battery will need to be replaced. It’s not cheap, but you’ll need to spend money on it to keep driving.
How Do You Start A 2017 Chevy Cruze With The Key Fob?
Using the keyless entry and ignition button on your Chevy Cruze is simple.
- To lock your Cruze, press the LOCK button on your vehicle key fob.
- Press and hold the key fob’s REMOTE START button for at least four seconds.
- The vehicle’s directional indicators illuminate, and your car is started.
The remote-start engine has an automatic shutoff timer set for 15 minutes.
Why Can’t I Turn My Key In My Chevy Cruze?
The typical causes of a stuck key in a Chevrolet Cruze include a binding steering column/lock, a malfunctioning ignition switch that needs bypassing, or damaged ignition keys.
Conclusion
The transmitter pocket Chevy Cruze 2017 is a convenient improvement that will help you start your car when the internal battery in your key fob is dead.
I recommend that you know how to use a transmitter pocket to start a Chevy Cruze because the dead battery of a key fob is a very popular issue that you may meet once in your life.