The 2014 Chevy Spark code 82 is among the most common error codes. This code is widespread with Chevy cars from 2012 to 2013.
Regardless of the scenario, an error number code on our dashboard is always bothersome for a car owner.
The presence of error code 82 on our Chevy dashboard means that we need to change the oil in our vehicle.
The current engine oil level is 5%. Failure to pay attention when our car displays code 82 might lead to serious engine issues. Continue reading to learn more.
What Is The 2014 Chevy Spark?
The 2014 Chevrolet Spark is an excellent choice for first-time purchasers and city residents. Users consider the car for its affordable price, small size, and plenty of luxuries and safety features.
It is a four-seat, four-door hatchback. The car is among the smallest automobiles on the market, together with the Fiat 500, Smart ForTwo, and Scion iQ.
There are three trim levels, including 2LT, 1LT, and LS.
The Chevrolet Spark comes with an available continuously shifting automatic gearbox for 2014 and onwards.
It allows increased gas efficiency, quicker acceleration, and smoother performance. All vehicle models now have automatic headlights, and the 2LT has integrated turn signals and heated side mirrors.
What Does Code 82 Mean On A Chevy Spark?
Since our Chevy has new features, some light trouble codes can be strange and unfamiliar.
If we’re driving the Chevy Spark and receive the Code 82 error signal, we could panic, particularly when we don’t know what it signifies.
The error code message 82 means it’s time to replace the oil.
It’s a code indicating that our oil is going to run out and that we must change it as soon as possible. It’s not an explicit warning.
Regular oil changes on our automobile avoid engine problems and allow it to perform at its best.
As we drive our automobiles daily, the oil in our car starts to get remnants from various engine components.
What Is The Cause Of 2014 Chevy Spark Code 82?
Short answer: As noted in the overview above, the 2014 Chevy Spark code 82 indicates that we should replace our engine oil.
This notification is not in the high warning category, where we must act immediately. However, it means doing so within an acceptable amount of time.
An oil replacement on any vehicle ensures that our engine runs at peak performance. As time passes, our engine oil accumulates residue while lubricating various elements.
The oil flows through the filter and into different components. Over time, the filter becomes clogged and fails, and the oil loses its lubrication.
Our engine can get harmed if we use old oil with a faulty fuel filter. The check engine light trouble on our dashboard prevents us from reaching this point.
Is Fixing 2015 Chevy Spark Code 82 The Same As Code 82 Chevy Spark 2014?
Yes, the Chevy code 82 means the same problem with the oil. The oil is running out of its purity.
When we get this oil change maintenance code, the recommended course of action is to replace the oil as soon as possible.
Besides, fixing code 82 chevy spark 2015 also means resetting the warning notification code.
When we checked the oil and nothing was wrong with it, there could be problems with the engine code system.
Thus, we have to remove the code. The two model cars’ resetting oil life meter process is also similar. We will discuss it below.
How To Fix Code 82 On A Chevy Spark?
The code 82 warning appears when our engine’s oil is low or has to be replaced. All we need to do is change the engine oil with fresh oil. Here’s how it works:
Step 1: Park our car and lift the hood.
Step 2: Find the oil tank, which is normally a box-shaped component with a logo.
Step 3: Remove the tank lid to drain the old oil conveniently.
Step 4: Using a 24mm socket, move the position of the oil filter or detach it.
Step 5: Lift the base of our vehicle with a jack, lay beneath it, and find the oil drain plug below the engine.
Step 6: Find a bottle to collect old oil, insert the oil drain plug in the bottle, and wait a couple of minutes for the oil to drain.
Step 7: After removing the oil, put the plug back and secure it.
Step 8: After working beneath the car, step out, grab a funnel, and place it on the tank.
Step 9: Add the fresh oil into the tank, filling it to 4.8 quarts. The tank should then be covered.
The error code will remain on our info screen since the auto system is unaware that we have changed the oil. The steps for removing the oil change light from the dashboard are as follows:
Step 1: Put the key into the ignition. Start the engine when in the parking position.
Step 2: The code remains visible on the dashboard, and the oil level will remain zero.
Step 3: Select the menu button until it reaches the “oil life” option. The word “reset” and the oil life number from 5 or below will occur.
Step 4: Press and hold the Set/CLR (reset button) when we hear the engine beep sound. Continue to click till the oil proportion hits 100%.
If you still find it hard, bringing your car to a Chevy Auto technician is a good option. They will do it quickly and can offer a thorough inspection.
Is it Safe to Drive With A Chevy Code 82?
Yes, the car is okay to continue driving. However, it is time for an oil replacement. Running any vehicle with old unclean oil adds tear and wear to the car, reducing life expectancy.
Oil changes are an important maintenance aspect and should be handled as soon as the code 82 notification arrives.
Considering the cost we must pay later for other severe engine damage, it is still better to immediately change the oil.
Frequently Asked Questions
What Type Of Oil Should I Use For My Chevy Spark?
Chevy Spark versions from 2013 to 2015 were designed to be highly reliable. The 1.2L V4 Ecotec engine produced up to 84 hp at 6400 RPM in the versions.
The engine is capable of generating 83 lb-ft of torque at 4200 RPM. It is available in LS (Auto) Hatchback trim.
The oil capacity of this version of Chevy Spark is 4 quarts. SAE 0W-20 or 5W-30 is the suggested oil viscosity for these Spark versions.
How Much Oil Does A Chevy Spark Need To Run Properly?
The oil volume is 4 quarts (3.8 liters). Code 83 indicates that the filter and the oil must be changed.
Every 7,500 miles, it will flash signal the owner to have regular engine maintenance, including oil change.
While not an emergency, code 82 will show once our oil life falls to 5% or below, and the oil should be changed, as previously indicated.
How To Reset Code 82 For 2016-2022 Chevy Spark?
The process is the same as with the 2014 Chevy Spark engine code resetting. However, the location of the buttons can be different.
TheMENU button is located on the left stalk, and we press it to reach the OIL reset menu screen. The SET/CLR button is positioned at the end of the left stalk.
Conclusion
The 2014 Chevy Spark Code 82 indicates that it is time we should replace our old oil. Since it is not an emergency alarm, it is advisable to change the oil soon.
Otherwise, the old oil with debris will make our filter blocked. It can lead to engine failure or reduced engine power later.