Have you ever heard of the blinking drive light Honda CRV? If yes, you’ve come to the right place. Otherwise, you’re lucky if you’ve never faced it.
However, there’s nothing wrong with some knowledge of the mechanical issue in advance. Let’s get started!
What Does The Blinking Drive Light Honda CRV Mean?
Flashing drive light Honda CRV means your automatic transmission has some electrical problems.
It can result from minor issues such as a broken sensor or bigger problems such as faulty exhaust systems.
The thing is, you can not determine exactly how bad you are in the situation.
Preparing yourself for the worst scenario is not accelerated because there’s a chance of fire from the indicator light D flashing on Honda CRV.
Why Do You Have The Blinking Drive Light Honda CRV?
When you have a blinking drive light Honda CRV, you should first think of a faulty transmission.
The problem also derives from failures of the shift solenoid connector, alternator, charging system, or clutch pressure sensor. Getting help from the professional service center is highly recommended.
Low Transmission Fluid Level
Besides a bad transmission pressure switch, the most common cause for Honda CRV D blinking is the low level of transmission fluid which is related to the lack of pressure in the system.
The tip is to use the dipstick to check the oil level to ensure it’s within the limit.
Look for the label; once you can find it, take out the dipstick and clean it. Then, place it back inside and remove it again.
If it indicates a low fluid level, you should fill it up to troubleshoot the problem. Pay more attention to transmission slipping after fluid change as well.
Suppose this way doesn’t make the flashing D light on Honda CRV disappear; bring your vehicle to the transmission specialist for a proper diagnosis.
Shift Solenoid Problem
The shift solenoid connector plays a role in controlling the fluid flow and connecting the gear. Anything wrong with the gear engagement and disengagement process requires you to change the solenoid.
To analyze whether the part is the reason for Honda CRV D flashing or not, have an auto service see the solenoid ports and test the pressure control solenoids.
Before that, you can observe any hints of the problem, like difficulties in skipping gears, irresponsible shifting, or limp mode.
Broken Alternator
A bad alternator is another possibility for Honda CRV D light flashing. More terribly, it can lead to a dead battery which causes a lot to be fixed. There are some signs to identify your alternator is failing.
Besides a dead battery, stalling or slowly rotating engine, battery warning light, or burning rubber smell are what you should notice.
You can use the voltmeter to see if your 12v battery receives enough voltage from the alternator.
Here is the same advice again, have your vehicle checked with the Honda cars & trucks service.
Charging System Failure
According to experts, any issue with the charging system also can result in a Honda CRV blinking drive light. It can be a matter of a broken fuse and a loose connection.
When you experience loss of power in the steering wheel, such as steering wheel shake, dimming interior or headlights, or stalling engine, you can assume there’s something wrong with the charging system.
Furthermore, it’s time to check the electrical system once you sense the smell of a blown fuse or see the check engine light is bright.
Clutch Pressure Sensor
When the check engine light is on, the car is stuck or starts improperly; it’s reasonable to think you have a bad clutch sensor.
The sensor is unable to control the pressure in the clutch system; in turn, the shifting gears are unsmooth. Honda CRV drive light blinking can be caused by this failure as well.
How To Fix The Blinking Drive Light Honda CRV
Park Your Car
As mentioned above, flashing D Honda CRV can happen for different reasons, from minor to serious.
Though there are small problems that you can fix by yourself (if you know how to), such as connecting a loose wire or fixing a bad fuse, you’d better park your car.
It’s a smart and less risky move because when you can not grasp what’s going on in your Honda CR-V, it’s better to stop.
Especially when you are in the middle of the road, it’s safer to just pull over to figure out the solution rather than staying with a totally broken car.
Leave your vehicle for a couple of days before finding out what to do next!
Decide Where To Have Your Car Repair
There are two options: fix it by yourself or have a mechanic done that.
You can choose the first one if you have some related experience, or you have time and want to learn about it (only about small issues).
Still, Honda CRV D flashing is not something you can play with, and you’d better leave it for qualified professionals.
Why Can’t You Keep Driving With Blinking Drive Light Honda CRV?
The moment you see the D blinking Honda CRV is when you should stop. It indicates that your transmission needs help, and you have to sort out the solution as soon as possible.
This light or transmission trouble is not something that you can underestimate.
It’s good if flashing D Honda CRV comes from a broken fuse, but what if the main issue is the compression? What terrible scenario can happen when you keep driving your vehicle?
Since you don’t know the root of the problem, take your car to the repair shops for further checking.
Provided that there’s no other choice than to drive, do it carefully and keep driving for short distances until you reach the auto repair.
Conclusion
Turning off your engine when you see the blinking drive light Honda CRV on your dashboard is the correct thing you can do in this situation.
It’s better to ask highly-rated, verified experts to diagnose the exact reason and give you the best solution.