The voice-activated Ford Sync Radio system may offer consumers information and entertainment.
Using the radio won’t divert the driver’s attention from the road because they were made more convenient for the driver.
A few items must be checked if the Ford Fusion’s radio is not working. This article below will explain the problem of the Ford Fusion radio not working and how to fix it.
Ford Fusion Radio Not Working: The Reasons
Ford Fusion radio users should first inspect the radio to identify the source of their issues.
Various factors, such as obsolete software, faulty wiring, or radio fuses, may bring on this common issue.
Outdated Software
Some automobiles, including the Ford Fusion, may require software updates for their radio systems.
If the radio in your 2014 Ford Fusion isn’t working, it may be because the software is outdated and won’t operate properly.
You would only need to consult your car’s manual to learn how to upgrade the radio. The update can be downloaded onto a USB stick or delivered automatically via Wi-Fi.
You must sign into your owner account and go to the SYNC software update page to use the USB update. About 20 to 30 minutes will pass before the in-vehicle update is finished.
Low Temperatures
The problem with your 2015 Ford Fusion’s radio not working is due to the environment, particularly if it is too cold.
Although modern electronics are made to tolerate a wide variety of temperatures, it is still possible for extremely cold temperatures, below around -15 degrees Fahrenheit, to deform the circuit boards and marginally impair operation.
The cold often causes a faulty solder connection or a loose wire to lose contact. It occurs in dated automotive electronics.
The circuitry is subjected to a highly hostile environment. It would manifest as a total lack of functionality until the temperature reached the operating range.
Bad Fuses
A blown fuse is a possible reason for the unexpected demise of your Ford Fusion radio.
Every automobile radio has at least one radio fuse to guard against power surges coming from elsewhere in the car.
This dash fuse issue will blow out and cut off the circuit if the audio system receives excessive current, protecting the main radio.
Avoid switching out your car radio’s fuse for a bigger one if it keeps blowing; you risk damaging your audio products. Find and fix the short circuit, which is presumably present someplace.
High Temperatures
The high temperature impacts all electrical equipment, and your Ford Fusion stereo is not an exemption. The radio or antenna cable may have come free.
Thermal expansion is the main cause of your car radio possibly not working while it’s hot outside. When materials are heated, this happens, and they enlarge in size.
The internal components of the automobile stereo may melt due to thermal expansion when heated, rendering the stereo unit inoperable.
Wiring Problems
A wiring issue is another typical cause of your 2018 Ford Fusion radio not working, in addition to excessive temperatures.
Naturally, everything with wires has the potential to have problems with those wires.
Numerous connections connect the main control unit to the interior speakers, the dead battery, the alternator, and any additional amplifiers for subwoofers in the boot.
Whether you have an after-market radio unit, it’s fine to have a professional evaluate the wiring, whether there was a poor installation, or whether time and vibration just shook a wire or two loose.
Bad Tuner
You may still utilize the FM or AM radio on the Ford Fusion radio, even if most people these days choose to stream music.
If either component doesn’t switch on, but the power to the radio is working, they have probably passed away.
Because it needs a signal from the functional antenna, the car audio won’t function if the tuner is destroyed. If the tuner is not working properly, the automobile radio is powerless.
Asking for assistance from a car radio expert is needed if you are unsure how to identify a damaged antenna or tuner.
Ford Fusion Radio Not Working: How To Fix?
Check The Fuses
When your Ford Fusion isn’t operating, you should check all of your fuses first. It would help if you pulled out some fundamental auto-diagnostic tools, such as a multimeter and a test light.
The place of the fuse box on your Ford Fusion is required. It’s to the left of the driver’s seat on most makes and models.
Using a test light is a superior method of confirming an operational fuse.
You can do this without even blowing a fuse. Replace any blown-out fuses you observe, then check whether the replacement switch still blows.
Check The Connector
First, you should remove the head unit to access the wiring and continue with the diagnostic process.
You must first remove the radio from the dash to access the cables to test the vehicle radio connectors.
Use a multimeter to check a circuit’s continuity, or completeness, between two places while checking stereo wires. You can take off and replace the pigtail if you have any concerns.
Check The Head Unit Power
The next stage is to verify that the radio has power if the fuses and connections are both sounds.
An electronic signal generated by the head unit is converted into air vibrations transmitted through the speakers.
The sound will stop if an electrical device interferes with the signal. Disconnect your car’s battery, then plug it back in so the radio will turn on to reset your head unit.
Reset The Radio
Another solution to this problem is to do the 2014 Ford Fusion radio reset. If you purchased your car brand-new from the previous owner, you ought to have gotten a code card.
If not, you should take the vehicle to the dealer with identification to have it reset. Once you don’t have either, this radio and car are probably not yours because this is intended to deter radio theft.
Replace The Radio
The only option is to replace the radio if none of the overhead fixes are successful.
To receive them, you’ll either have to buy a new dash kit or contact the kit maker and ask if they’ll give you a replacement set.
Another choice would be to visit your neighborhood auto audio stores and inquire when they have any extra parts.
Depending on their characteristics, radios can cost anywhere from $50 to $500 or more.
FAQs
What Is A Good Receiver To Replace The Oem Radio In A 2008 Ford Fusion?
Select a Kenwood or any other brand that uses Garmin GPS if you want navigation. Some OEM navigation systems use TomTom, which has exorbitant update fees.
Compared to OEM radios, most aftermarket products offer a substantially higher output power.
How Do I Get A Radio Code For A 2006 Ford Fusion?
Bring the VIN, ownership documentation, and the OEM clean factory-installed radio to any Ford dealer if it is. The stereo code will be on file, but they might want a modest fee to give it.
How Long Can A 2014 Ford Fusion Hybrid Last?
A Ford hybrid may travel anywhere from 150,000 to 200,000 miles on average. Your Ford hybrid should last 10 to 13 years if you travel about 15,000 miles annually.
Conclusion
Many factors are causing the problem of the Ford Fusion radio not working. Before you seek expert assistance to fix your car stereo, try the options given above.
Don’t panic; take your car to a shop as soon as possible if you’re not confident you can do it.