You will notice the power button on rear view mirror when owning a car. The rearview mirror power button is a little key that controls the power to the mirror.
It is normally situated close to the top of the mirror’s backside or on the EZ Pass windshield dot zone, and you can control the mirror by turning it on or off.
Do you wonder what it is used for? If yes, keep reading to see the full information!
What Is The Power Button On Rear View Mirror?
The power button on the rear view mirror is a high-tech mirror feature available on many later model redesign cars.
It is a switch that activates the mirror when tapped. This functionality is useful for a variety of reasons.
What does the power button on my mirror do? For starters, vehicle owners can look behind them without turning around. This is incredibly beneficial when turning or changing direction.
Also, it assists drivers in avoiding blind zones and having a wider range of visibility. The motorist can view in difficult-to-see locations by turning on the mirror.
It can serve as a security element, too. Suppose the motorist has been in an accident.
In that case, the pushbutton can enable the mirror, allowing the driver to view what is happening behind them during day driving, night time, wind blast, or cold weather conditions.
Why Does My Rear View Mirror Have A Power Button?
It is fairly easy. Your rear mirror is not a flat type; it has a thicker glass piece on a single end than the other.
The wedge slides when you turn the switch at the bottom of the rearview. This alters how light flows through it and how light is reflected.
The rearview mirror’s power button adjusts the degree of light produced by the mirror. The driver can adjust the intensity of the light by tapping the power switch.
This is beneficial in ensuring drivers can see the road ahead without being distracted by bright lights, even in night time driving.
Furthermore, you can use the power switch to disable the mirror, which is beneficial when the driver does not want to be seen.
How To Turn On/Off The Power Button On The Rear View Mirror?
The electric rearview mirror is well known, but few people know how to turn the on/off switch on rear view mirror correctly. Here are some tips on how to operate the manual rear view mirror’s power button.
- First and foremost, the power button is not an ON/OFF switch. The Power Button functions similarly to a Dimmer Switch. The ON/OFF button is on the mirror’s side.
- When you click the power button, the quantity of light showing through the mirror changes rather than turning it on or off.
- If you push the button once, the light level will be reduced to 50%, and if you touch it twice, it will be increased to 100%.
- To shut off the mirror, tap and hold on the buttons on rear view mirror for approximately 3 seconds.
- Also, remember that the power mirror adjustment does more than the dimming function. The reflection’s triangles will also change if you push and hold the power button.
- It is critical to determine if you want to utilize the mirror to see behind you while reversing in actual distance.
- To adjust the mirror’s angle, click and hold onto the rear view mirror button, then grab the bottom with your other hand and pull it up or down until you achieve the desired angle.
Note: You can also take off the rear view mirror when needed.
What Are The Instructions For The Power Buttons On The Rear View Mirror?
The steps are as follows:
- The power button is in the right-hand corner of the mirror.
- Holding down the button for around 2 seconds to switch on the power.
- The LED function will light up to indicate that the energy has been turned on.
- Tap the button for roughly 2 seconds to switch off the power.
- When the power is turned off, the LED indicator will blink off.
What Are The Instructions For The Other Buttons On The Rear View Mirror?
Button Function
- Volume Down: Lowers the speaker’s volume for guidance directions and Bluetooth calls.
- Power on/off: This enables you to switch off the guidance system when not in use.
- Navigate Safe Mode: This effective rear view visibility option disables the touchscreen until the subsequent turn or manual instructions are displayed. If your next command is less than one minute ahead, the screen will show the next direction and switch off.
- Home Menu: If you are in the menu bar, this button will send you to the main selection menu or switch off the display.
- Bluetooth: On any other screen, this will send you right to the Bluetooth Menu to complete or respond to the call.
- Reset: This restores the Navigation system’s manufacturer preset settings.
- Monitor/Screen: This section shows your Navigation/Bluetooth/Reverse Camera. Because this is a touch-sensitive screen (like most smartphones), it does not require to be touched firmly; a gentle touch will suffice.
Do not use your fingernails or other things to contact or touch the screen. It works by making a connection with your thumb. It may take longer to touch in chilly weather.
When you wear rubber gloves or have your fingertips covered, the auto mirror will not respond.
Main Menu
To begin or enter the navigation mode, tap the GPS Icon or hit the Navigation Key button.
Note: For the Navigation to function properly, you should be in an open location; the vehicle should not be in a basement or parking structure or have an obstructed view of the skies.
Pairing Your Phone With The Mirror Unit
In addition, your device has Bluetooth-enabled hands-free capabilities, allowing you to make and take calls when driving comfortably by pairing your phone with your car.
The procedure for developing a security pairing entails connecting your phone and the mirror device.
Note: Your phone should have Bluetooth capabilities and an enabled Bluetooth feature to link to the smart rearview mirror.
If you are unsure, please consult the user guide that comes with your phone.
Making Calls Using Bluetooth
There are four ways to start a call:
- Use your handset: Your phone will immediately use the mirrored device’s mic and playback features.
- Use the Keypad: Select the Bluetooth button. Select the ‘Keyboard’ icon from the Bluetooth menu. You can then instantly dial a number using the Keypad. To begin your contact, tap the ‘Phone’ symbol.
- Use the Call Log: To see a list of recently dialed, answered, and missed calls, navigate to the Bluetooth menu and click the ‘Dialer pad’ icon, followed by the ‘Call log’ icon. Choose the desired number and tap the ‘Phone’ icon to initiate a call.
- Use the Redial feature: Press the ‘Keypad’ icon from the Bluetooth menu. Select the ‘Phone’ icon to redial the last number you called.
Receiving and Ending Calls
When you get a call on the phone linked to the smart rearview mirror device through Bluetooth, a box will appear on the screen along with the number of the contracting party (if caller ID is enabled).
You can choose the icon that appears on the screen to answer or reject the call.
Viewing Or Changing the Pairing Code
From the Bluetooth option, select ‘Settings”, then select ‘Properties.’ inside. The present pairing code is displayed in the ‘PIN Code’ section.
To alter it, tap the ‘PIN Code’ area, and a keypad will appear. Import the new code you want and hit the enter button to save your changes.
Settings
In the settings sections, you can adjust the volume, the backlights of the mirror, the language, and the systems.
The system includes “GPS test” and “Factory reset”. The GPS test will calculate the number of satellites received.
The antenna is located inside the mirror casing. Any objects on the mirror casing or the windshield above the mirror will interrupt the signal.
“Factory reset” will return the mirror to its original status. This option will delete all information and contact numbers before installation from the mirror. You should only use it if a complete reset is necessary.
Conclusion
In conclusion, the power button on rear view mirror is a very important safety feature in your car. Knowing what to do with them successfully can eliminate your stress along the road.
Now, all your queries are solved, and this is also the end of today’s topic. Thank you for your time. See you around!